NEW CARLISLE, OH —
OSHA Inspection: BEACH MANUFACTURING COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BEACH MANUFACTURING COMPANY in 7816 W. NATIONAL ROAD, NEW CARLISLE, OH 45344 (NAICS 332999). OSHA activity number 345662795.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BEACH MANUFACTURING COMPANY
- Site address
- 7816 W. NATIONAL ROAD
- City
- NEW CARLISLE
- State
- OH
- ZIP
- 45344
- Mailing
- PO BOX 129, DONNELSVILLE, OH 45319
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 65
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 II
- Issued
- Feb 17, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $11,167 · Current $2,167 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii):Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). a) On or before 12/1/2021 the employer did not ensure that employees required to operate PIVs had successfully completed formal classroom as well as practical training prior to operating PIVs in-order to ensure safe operations.
Recent events (2)
- — I (S) $2167
- — Z (S) $11167
1910.178 L04 III
- Issued
- Feb 17, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $896 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance shall be conducted at least once every three years. a) On or before 12/1/2022 the employer did not re-certify forklift operators within three years of being certified as an operator.
Recent events (2)
- — I (O) $0
- — Z (O) $896
1910.212 A03 II
- Issued
- Feb 17, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $11,167 · Current $2,167 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii):The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. a) On or before 12/1/2021 the employer did not properly guard the point of operation on a Pines 60 ton water cooled press. Employees were exposed to a caught in hazard while operating the press due to the setup of the press being operated by a foot pedal.
Recent events (2)
- — I (S) $2167
- — Z (S) $11167
1910.219 B01
- Issued
- Feb 17, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $11,167 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(b)(1):Flywheels. Flywheels located so that any part is seven (7) feet or less above floor or platform shall be guarded in accordance with the requirements of this subparagraph: a) On or before 12/1/2022 the employer did not ensure that the flywheel located on the Perkins 9-H 125 ton was properly guarded, in that the bottom portion of the flywheel located less than 7' from ground was not guarded this exposed employees to a potential caught-in hazards while operating the press.
Recent events (2)
- — I (S) $0
- — Z (S) $11167
1910.303 G02 II
- Issued
- Feb 17, 2022
- Abate by
- Mar 9, 2022
- Penalty
- Initial $7,977 · Current $7,977
General-duty citation text
29 CFR 1910.303(g)(2)(ii):In locations where electric equipment is likely to be exposed to physical damage, enclosures or guards shall be so arranged and of such strength as to prevent such damage. a) On or before 12/1/2021 the employer did not ensure that live wiring of 230 volts on the side of the Pines 60 ton water press was protected to prevent damage to the wiring or injuries to employees.
Recent events (2)
- — I (S) $7977
- — Z (S) $7977
1910.217 C02 VI
- Issued
- Feb 17, 2022
- Abate by
- Mar 16, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(c)(2)(vi):The adjustable barrier guard shall be securely attached to the press bed, bolster plate, or die shoe, and shall be adjusted and operated in conformity with Table O-10 and the requirements of this subparagraph. Adjustments shall be made only by authorized personnel whose qualifications include a knowledge of the provisions of Table O-10 and this subparagraph. a) On or before 12/1/2021 the employer did not ensure that the backside of the Perkins 9-H 125 ton power press was properly guarded. Employees are exposed to a stuck by hazard from the metal scraps coming from the back side of the press.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Beach Manufacturing Company
View Beach Manufacturing Company's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345662795.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.