KERRVILLE, TX —
OSHA Inspection: AIRSTREAM AARON
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of AIRSTREAM AARON in 3951 BANDERA HIGHWAY, KERRVILLE, TX 78028 (NAICS 336214). OSHA activity number 345666275.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AIRSTREAM AARON
- Site address
- 3951 BANDERA HIGHWAY
- City
- KERRVILLE
- State
- TX
- ZIP
- 78028
- Mailing
- 3951 BANDERA HIGHWAY, KERRVILLE, TX 78028
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336214
- Employees
- 1
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.213 C01
- Issued
- Jan 31, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $4,351 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.213(c)(1):Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. On or about November 29, 2021, and at times prior thereto, employees were operating a DeWalt DW744 type 1 table saw to cut wood and aluminum without the use of a guard, exposing employees to the hazard of being struck-by rotating parts.
Recent events (2)
- — I (S) $1500
- — Z (S) $4351
1910.213 C02
- Issued
- Jan 31, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2):Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. On or about November 29, 2021, and at times prior thereto, employees were operating a DeWalt DW744 type 1 table saw to cut wood and aluminum without the use of a spreader, exposing employees to the hazard of being struck-by wood and metal kicked back by the saw.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jan 31, 2022
- Abate by
- Feb 17, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3):Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. On or about November 29, 2021, and at times prior thereto, employees were operating a DeWalt DW744 type 1 table saw to cut wood and aluminum without the use of anti-kickback fingers, exposing employees to the hazard of being struck-by wood and metal kicked back by the saw.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A04
- Issued
- Jan 31, 2022
- Penalty
- Initial $2,486 · Current $450 Reduced
General-duty citation text
29 CFR 1910.215(a)(4):Grinding machinery was not used with work rest(s) to support offhand grinding work. On or about November 29, 2021, and at times prior thereto, employees were operating a Skil 3380 6-inch bench grinder without a work rest attachment being used, exposing employees to the hazard of being struck-by rotating parts.
Recent events (2)
- — I (S) $450
- — Z (S) $2486
1910.215 B09
- Issued
- Jan 31, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. On or about November 29, 2021, and at times prior thereto, employees were operating a Skil 3380 6-inch bench grinder without an adjustable tongue guard being used, exposing employees to the hazard of being struck-by flying debris.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A02
- Issued
- Jan 31, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: On or about November 29, 2021, and at times prior thereto, employees were operating a Skil 3380 bench grinder that had a wire brush wheel rotating without a guard, exposing employees to the hazard of being caught-in rotating parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.39 A02
- Issued
- Jan 31, 2022
- Penalty
- Initial $1,865 · Current $450 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. On or about September 16, 2021, at approximately 12:50pm, an employee suffered an injury that resulted in the amputation of a portion of the left thumb. The amputation was not reported within 24 hours to the local Area Offices of the Occupational Safety and Health Administration.
Recent events (2)
- — I (O) $450
- — Z (O) $1865
More inspections in this industry (NAICS 336214)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345666275.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.