HARBESON, DE —
OSHA Inspection: ACCUTRENCH CONTRACTING LLC
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of ACCUTRENCH CONTRACTING LLC in IN FRONT OF 25344 ROAD 395, HARBESON, DE 19951 (NAICS 238910). OSHA activity number 345668875.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ACCUTRENCH CONTRACTING LLC
- Site address
- IN FRONT OF 25344 ROAD 395
- City
- HARBESON
- State
- DE
- ZIP
- 19951
- Mailing
- 305 N. UNIVERSITY AVE., FEDERALSBURG, MD 21632
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238910
- Employees
- 30
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.1200 E01
- Issued
- May 27, 2022
- Abate by
- Jun 24, 2022
- Penalty
- Initial $8,702 · Current $8,702
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and maintain at the workplace a written hazard communication program which describes how the criteria specified in paragraphs (f), (g), & (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes items (i) and (ii) of this subparagraph: a) Utility Installation job - in the area east of the intersection of Delaware Route 30 and Road 295, Harbeson, DE 19951: On or about 12/2/2021, the employer did not provide or maintain a hazardous communication program to include labels and other forms of warning, safety data sheets, and employee information and training as required. ABATEMENT NOTE: A written program shall include description of how the criteria for the following will be met: 1. Labeling and other forms of warning; 2. Material Safety Data Sheets; 3. Employee information and training Additionally, a list of hazardous chemicals known to be preset in the workplace must be compiled. Methods used to inform employees of the hazards associated with non-routine tasks and the informing of contractors of workplace hazards, including a description of the labeling system used in the facility and of the availability of material safety data sheets, must also be addressed. The written program must be made available upon request.
Recent events (1)
- — Z (S) $8702
1910.1200 E01 I
- Issued
- May 27, 2022
- Abate by
- Jun 24, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet. a) Utility Installation job - in the area east of the intersection of Delaware Route 30 and Road 295, Harbeson, DE 19951: On or about 12/2/2021, the employer did not develop nor maintain a chemical inventory list identifying the hazardous chemicals being used by their employees.
Recent events (1)
- — Z (S) $0
1910.1200 H01
- Issued
- May 27, 2022
- Abate by
- Jun 24, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Utility Installation job - in the area east of the intersection of Delaware Route 30 and Road 295, Harbeson, DE 19951: On or about 12/2/2021, the employer did not provide training on hazardous chemicals to be used on the site nor did the employer provide SDS sheets for the employees to reference in case their was an exposure.
Recent events (1)
- — Z (S) $0
1926.200 G02
- Issued
- May 27, 2022
- Penalty
- Initial $10,151 · Current $10,151
General-duty citation text
29 CFR 1926.200(g)(2): Traffic control signs or devices used for protection of construction workers did not conform to Part VI of the Manual on Uniform Traffic Control Devices for Streets and Highways, 2009 Edition, December 2009 (including Revision 1 dated May 2012 and Revision 2 dated May 2012) - see 1926.6: a) Utility Installation job - in the area east of the intersection of Delaware Route 30 and Road 295, Harbeson, DE 19951: On or about 12/2/2021, employees were exposed to hazards onsite including but not limited to struck by/caught in hazards when the employer failed to ensure employees were provided the required flagger stand set up within the work zone for utility installation with a lane closure. According to table 6E-1 of the MUTCD with the roadway speeds of 50 mph a flagger sign should be posted approximately 425 feet from the flagger stand allowing for adequate time to stop according to Section 6E.08.
Recent events (1)
- — Z (S) $10151
More inspections in this industry (NAICS 238910)
More inspections in DE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345668875.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.