PORT CLINTON, OH —
OSHA Inspection: C.L. DEEMER ROOFING & SHEET METAL CO. INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C.L. DEEMER ROOFING & SHEET METAL CO. INC. in 220 LINCOLN ST., PORT CLINTON, OH 43452 (NAICS 238160). OSHA activity number 345671861.
Where did this inspection happen?
- Establishment
- C.L. DEEMER ROOFING & SHEET METAL CO. INC.
- Site address
- 220 LINCOLN ST.
- City
- PORT CLINTON
- State
- OH
- ZIP
- 43452
- Mailing
- 506 PARK PLACE, FREMONT, OH 43420
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 13
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.501 B13
- Issued
- Abate by
- Penalty
- Initial $5461.00 · Current $2730.00 Reduced
General-duty citation text
29 CFR 1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): On or about December 7, 2021 the employer C.L. Deemer Roofing & Sheet Metal Co. Inc. at worksite located at 220 Lincoln St. Port Clinton OH 43452, did not ensure employees were protected from falls while conducting residential roofing activities on the second level of a two story single family home, while exposed to a fall of 11 feet 3 inches to the ground below.
Recent events (2)
- — I (S) $2730
- — Z (S) $5461
1926.503 A01
- Issued
- Abate by
- Penalty
- Initial $5461.00 · Current $2730.00 Reduced
General-duty citation text
29 CFR 1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: On or about December 7, 2021 the employer C.L. Deemer Roofing & Sheet Metal Co. Inc. at worksite located at 220 Lincoln St. Port Clinton OH 43452, did not have a fall protection training program in place to enable each employee to recognize the hazards of falling, and procedures to minimize these hazards. Such programs would support the employer and employees in identifying and avoiding potential hazards such as falls during job site operations, decreasing the probability of employee injury or illness.
Recent events (2)
- — I (S) $2730
- — Z (S) $5461
1926.1060 A
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1926.1060(a):The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards. On or about December 7, 2021 the employer C.L. Deemer Roofing & Sheet Metal Co. Inc. at worksite located at 220 Lincoln St. Port Clinton OH 43452, did not provide a training program for each employee potentially exposed to fall hazards while using a portable ladder to enable each employee to recognize the hazards of falling from the ladder and the procedures to be followed in order to minimize these hazards. Employees using the portable extension ladders to access the roof to perform roofing work were exposed to fall hazards of 11 feet 3 inches to the ground below.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- Abate by
- Penalty
- Initial $5461.00 · Current $2731.00 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1):Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: On or about December 7, 2021 the employer C.L. Deemer Roofing & Sheet Metal Co. Inc. at worksite located at 220 Lincoln St. Port Clinton OH 43452, did not ensure the side rails of eight portable extension ladders were extended at least three feet above the landing surface. Four employees were exposed to falls of 11 feet 3 inches while using the ladder to access the second level.
Recent events (2)
- — I (S) $2731
- — Z (S) $5461
More inspections at C.L. DEEMER ROOFING & SHEET METAL CO. INC.
OAK HARBOR, OH—2010-08-16 00:00:00
C.L. DEEMER ROOFING & SHEET METAL CO., INC.
PORT CLINTON, OH—1994-04-28 00:00:00
C.L. DEEMER ROOFING & SHEET METAL CO., INC.
View C.L. DEEMER ROOFING & SHEET METAL CO. INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
FAIRVIEW, TN—2026-07-16
MARVIN PINERA
CARSON CITY, NV—2026-07-16
UNKNOWN/INVALID ESTABLISHMENT
BANNOCKBURN, IL—2026-07-16
ROOFING H.P. LLC
LOXLEY, AL—2026-07-16
CARLOS CHE
BALTIMORE, MD—2026-07-16
VAL CONSTRUCTION INC
More inspections in OH
WELLINGTON, OH—2026-07-16
WHIRLAWAY CORPORATION
WAUSEON, OH—2026-07-16
WATSON WELL DRILLING INC.
SEVEN HILLS, OH—2026-07-15
STONEY ACRES BUILDERS LLC
SEVEN HILLS, OH—2026-07-15
GRB ENTERPRISES LLC
CHILLICOTHE, OH—2026-07-15
KENWORTH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345671861.