Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SOLIS GROUP, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SOLIS GROUP, INC. in 2020-36 W MONTROSE AVE, CHICAGO, IL 60618 (NAICS 238910). OSHA activity number 345678072.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Solis Group, INC. — free Get an email when a new federal OSHA severe-injury report for Solis Group, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
SOLIS GROUP, INC.
Site address
2020-36 W MONTROSE AVE
City
CHICAGO
State
IL
ZIP
60618
Mailing
4711 W LE MOYNE ST, CHICAGO, IL 60651
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238910
Employees
5
Ownership type
A

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Aug 3, 2022
Abate by
Aug 29, 2022
Penalty
Initial $349 · Current $349
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Solis Group, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:  Citation Number                Item Number                        Abatement Date      01                                    01a                                        04/14/2022      01                                    01b                                        04/14/2022      01                                    01c                                        04/14/2022      01                                    01d                                        04/14/2022  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $349

1926.403 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Apr 4, 2022
Abate by
Apr 14, 2022
Penalty
Initial $3,108 · Current $3,108
29 CFR  1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:  a)  On December 9, 2021, employees were using a Rayovac portable power strip listed for light office duty on a construction site.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $3108

1926.405 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 4, 2022
Abate by
Apr 14, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.405(b)(1): Conductors entering boxes, cabinets, and fittings were not protected from abrasion:  a)  On or about December 9, 2021, employees were exposed electrical shock where live conductors were not protected from abrasion when entering boxes.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

1926.405 J01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 4, 2022
Abate by
Apr 14, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.405(j)(1)(i):  Fixtures, lampholders, lamps, rosettes, or receptacles had live parts exposed to employee contact:  a)  On or about December 9, 2021, electrical receptacles and switches used by employees had live parts exposed to accidental contact.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

1926.405 J01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 4, 2022
Abate by
Apr 14, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.405(j)(1)(ii): Fixtures, lampholders, rosettes, or receptacles were not securely supported:  a) On or about December 9, 2021, electrical switches were not securely supported and were hanging freely by wires.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $0

View Solis Group, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345678072.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.