ATLANTA, GA —
OSHA Inspection: XL MACHINEWORKS LLC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of XL MACHINEWORKS LLC in 3311 EMPIRE BOULEVARD SW, ATLANTA, GA 30354 (NAICS 332710). OSHA activity number 345714562.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- XL MACHINEWORKS LLC
- Site address
- 3311 EMPIRE BOULEVARD SW
- City
- ATLANTA
- State
- GA
- ZIP
- 30354
- Mailing
- 830 GLENWOOD AVE SE, STE 510-212, ATLANTA, GA 30316
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 2
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 II
- Issued
- Jun 3, 2022
- Abate by
- Jun 30, 2022
- Penalty
- Initial $2,486 · Current $1,492 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii):The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: a) Warehouse: On or about December 6, 2021, and at times prior, the employer exposed employees to struck-by hazards, in that the employer did not ensure that employees operating powered industrial trucks completed training to safely operate the vehicles as they used them to mount large machine parts onto the Meuser & Co. lathe (Serial No. 26648).
Recent events (2)
- — I (S) $1491.6
- — Z (S) $2486
1910.212 A01
- Issued
- Jun 3, 2022
- Abate by
- Jun 30, 2022
- Penalty
- Initial $4,351 · Current $2,611 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Warehouse: On December 6, 2021, and at times prior, the employer exposed employees to hazards that could result in amputations, in that the rotating spindle of the Meuser & Co. lathe (Serial No. 26648) was not guarded as employees used the machine to fabricate parts.
Recent events (2)
- — I (S) $2610.6
- — Z (S) $4351
1910.212 B
- Issued
- Jun 3, 2022
- Abate by
- Jun 30, 2022
- Penalty
- Initial $1,865 · Current $1,119 Reduced
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) CNC Room: On or about December 6, 2021, and at times prior, the employer exposed employees to laceration hazards in that the Chicago Power Tools 33-BG6 bench grinder was not securely anchored to prevent movement, as employees used the machine to polish fabricated parts.
Recent events (2)
- — I (S) $1119
- — Z (S) $1865
1910.215 A04
- Issued
- Jun 3, 2022
- Abate by
- Jun 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4):Grinding machinery was not used with work rest(s) to support offhand grinding work: a) CNC Room: On or about December 6, 2021, and at times prior, the employer exposed employees to abrasion hazards in that the Chicago Power Tools 33-BG6 bench grinder was not fitted with work rests as employees used it to polish machine parts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Jun 3, 2022
- Abate by
- Jun 30, 2022
- Penalty
- Initial $2,486 · Current $1,492 Reduced
General-duty citation text
29 CFR 1910.303(b)(2):Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) CNC Room: On December 6, 2021, and at times prior, the employer exposed employees to fire hazards in that powered hand tools and work lamps were being energized using a power strip connected to an extension cord.
Recent events (2)
- — I (S) $1491.6
- — Z (S) $2486
1910.1200 E01
- Issued
- Jun 3, 2022
- Abate by
- Jun 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) CNC Room: On December 6, 2021, and at times prior, the employer exposed employees to chemical hazards, in that the employer did not develop a written hazard communication program for employees who use chemicals, such as, but not limited to, Phillips 66 compounded gear oil to fill the oil reservoirs of the CNC machines they operate.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at XL Machineworks LLC
View XL Machineworks LLC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345714562.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.