Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DI FRANCO MASONRY INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of DI FRANCO MASONRY INC. in 1842 S OGDEN ST., DENVER, CO 80210 (NAICS 238140). OSHA activity number 345718019.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch DI Franco Masonry INC. — free Get an email when a new federal OSHA severe-injury report for DI Franco Masonry INC. is published. One employer, no account, unsubscribe in one click.
Site address
1842 S OGDEN ST.
City
DENVER
State
CO
ZIP
80210
Mailing
4655 W. 112TH CT., WESTMINSTER, CO 80031
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
2
Ownership type
A

6 citations on file for this inspection.

1903.19 C01

Deleted Other-than-serious 1 instance 1 exposed
Issued
Aug 22, 2022
Abate by
Sep 26, 2022
Penalty
Initial $349 · Current $0 Reduced
29 CFR  1903.19(c)(1):The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  Abatement certification and documentation for Citation 001, Item 001, Citation 001, Item 002, Citation 001, Item 003, Citation 001, Item 004, and Citation 001, Item 005, with a final order date of 7/19/2022 was not received within 10 calendar days (by 7/8/2022) following the abetment due date (6/23/2022).
Recent events (2)
  • — I (O) $0
  • — Z (O) $349

1926.451 A01

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 3, 2022
Abate by
Jun 23, 2022
Penalty
Initial $4,351 · Current $3,000 Reduced
29 CFR  1926.451(a)(1): Each scaffold and/or scaffold component was not capable of supporting, without failure, its own weight and at least 4 times the maximum intended load applied or transmitted to it:  (a) On January 7, 2022,  while in the process of installing precast chimney caps on a residential property located at 1842 S Ogden St. Denver, CO, two employees working from a tubular steel framed scaffold that was not fully planked were not protected from a fall hazard.  Both employees fell approximately 28 feet from the top of the work platform to the ground below, when the wooden planks failed.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4351

1926.451 B01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 3, 2022
Abate by
Jun 23, 2022
Penalty
Initial $4,351 · Current $3,000 Reduced
29 CFR  1926.451(b)(1)(i): Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary:   (a) On January 7, 2022, the working platform/decking of a tubular steel framed scaffold was not fully planked and/or the remaining open space between the planks were no more then an inch to protect employees from a potential fall hazard. Employees tasked with installing precast chimney caps on a residential property located at 1842 S Ogden St. Denver, CO 80210, were exposed to fall hazards from a height of 28 feet from the top of the working surface to the ground below.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4351

1926.451 F03

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 3, 2022
Abate by
Jun 23, 2022
Penalty
Initial $4,351 · Current $3,000 Reduced
29 CFR  1926.451(f)(3): Scaffolds and scaffold components were not inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity:  (a) On January 7, 2022, the employer failed to ensure that visual inspections to identify deficiencies that could affect the structural integrity of the tubular steel framed scaffolding and it components used by two employees when installing precast chimney caps on a residential property located at 1842 S Ogden St. Denver, CO 80210 was inspected by a competent person, before each work shift or anytime the scaffold was relocate/moved. Employees were exposed to fall hazards from a height of approximately 28 feet from the working surface to the ground level).
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4351

1926.451 G04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 3, 2022
Abate by
Jun 23, 2022
Penalty
Initial $4,351 · Current $3,000 Reduced
29 CFR  1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms:   (a) On January 7, 2022, while in the process of installing precast chimney caps on a residential property located at 1842 S Ogden St. Denver, CO 80210, two employees working from tubular steel framed scaffolding that measure approximately four buck-high or approximately 28 feet from the working surface to the ground below were not protected from fall hazard(s), in that a guardrail system(s) was not installed on all open sides and ends of the platform.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4351

1926.452 C02

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 3, 2022
Abate by
Jun 23, 2022
Penalty
Initial $4,351 · Current $3,000 Reduced
29 CFR  1926.452(c)(2): All brace connections were not secured:  (a) On January 7, 2022, while in the process of installing precast chimney caps on a residential property located at 1842 S Ogden St. Denver, CO 80210, employees were exposed to a fall hazard while using a tubular steel framed scaffold that was missing one brace connection, and was not properly secured.   Employees were exposed to fall hazards of approximately 28 feet, the top of the working surface to the ground below.
Recent events (2)
  • — I (S) $3000
  • — Z (S) $4351

View DI Franco Masonry INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345718019.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.