WILLIAMSON, WV —
OSHA Inspection: ELECTRIC MACHINE AND FABRICATION, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ELECTRIC MACHINE AND FABRICATION, LLC in 10 INDUSTRIAL DRIVE, WILLIAMSON, WV 25661 (NAICS 332999). OSHA activity number 345718464.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELECTRIC MACHINE AND FABRICATION, LLC
- Site address
- 10 INDUSTRIAL DRIVE
- City
- WILLIAMSON
- State
- WV
- ZIP
- 25661
- Mailing
- PO BOX 277, VARNEY, WV 25696
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.138 A
- Issued
- Mar 18, 2022
- Abate by
- Apr 6, 2022
- Penalty
- Initial $4,144 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes. (a) Fabrication Shop: On December 28, 2021 and times prior, employees set up steel pieces of material on a Cincinnati Incorporated Sheer (Serial 3C129) and did not utilize appropriate hand protection to protect them from associated crushing hazards.
Recent events (3)
- — F (S) $3500
- — C (S) $4144
- — Z (S) $4144
1910.132 D01
- Issued
- Mar 18, 2022
- Abate by
- Apr 6, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): (a) Fabrication Shop: On December 28, 2021 and times prior, the employer did not perform a PPE Hazard Assessment for employees that set up and cut steel pieces of material on a Cincinnati Incorporated Sheer (Serial 3C129).
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.151 B
- Issued
- Mar 18, 2022
- Abate by
- Apr 6, 2022
- Penalty
- Initial $5,801 · Current $0 Reduced
General-duty citation text
29 CFR 1910.151(b): There was neither an infirmary, clinic, or hospital used for the treatment of all injured employees in near proximity to the workplace nor a person or persons adequately trained to render first aid: (a) Fabrication Shop: On December 28, 2021 and times prior, the employer was neither in near proximity to an infirmary, clinic or hospital nor was there a person or persons adequately trained to render first aid as treatment of all injured employees.
Recent events (3)
- — F (S) $0
- — C (S) $5801
- — Z (S) $5801
1910.212 A01
- Issued
- Mar 18, 2022
- Penalty
- Initial $4,144 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Fabrication Shop: On December 28, 2021 and times prior, employees cut material using a Cincinnati Incorporated Sheer (Serial 3C129) that was not equipped with a guard in front of the hold downs to protect employees from pinch point hazards.
Recent events (3)
- — F (S) $3500
- — C (S) $4144
- — Z (S) $4144
1904.29 B03
- Issued
- Mar 18, 2022
- Abate by
- Mar 30, 2022
- Penalty
- Initial $829 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not entered on the OSHA 300 Log and/or an incident report (OSHA Form 301 or equivalent) within seven (7) calendar days of receiving information that a recordable injury or illness has occurred: (a) Fabrication Shop: On December 28, 2021 an recordable injury occurred. The details of the injury were not completed in the OSHA 300 Log within seven calendar days of receiving the information.
Recent events (3)
- — F (O) $0
- — C (O) $829
- — Z (O) $829
1904.39 A02
- Issued
- Mar 18, 2022
- Abate by
- Mar 30, 2022
- Penalty
- Initial $2,486 · Current $2,000 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. (a) Fabrication Shop: On December 28, 2021 an occupation incident that resulted in an amputation occurred at the facility. The incident was not reported to OSHA until January 6, 2022.
Recent events (3)
- — F (O) $2000
- — C (O) $2486
- — Z (O) $2486
More inspections at Electric Machine and Fabrication, LLC
View Electric Machine and Fabrication, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in WV
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345718464.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.