Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RICHELIEU FOODS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of RICHELIEU FOODS, INC. in 1104 CLINTON AVE., WASHINGTON COURT HOUSE, OH 43160 (NAICS 311824). OSHA activity number 345720171.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Richelieu Foods, INC. — free Get an email when a new federal OSHA severe-injury report for Richelieu Foods, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1104 CLINTON AVE.
City
WASHINGTON COURT HOUSE
State
OH
ZIP
43160
Mailing
1104 CLINTON AVE., WASHINGTON COURT HOUSE, OH 43160
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
311824
Employees
50
Ownership type
A

4 citations on file for this inspection.

1910.28 B01 I

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
May 12, 2022
Penalty
Initial $9,687 · Current $0 Reduced
29 CFR  1910.28(b)(1)(i): Unprotected sides and edges.  (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following:   (A) Guardrail systems; (B) Safety net systems; or (C) Personal fall protection systems, such as personal fall arrest, travel restraint, or positioning systems.  a) On or about January 7, 2022, the employer did not ensure employees performing work on top of the hot spiral were provided with fall protection when they were over 5 feet above the floor.
Recent events (2)
  • — I (S) $0
  • — Z (S) $9687

1910.30 A01

Deleted Serious Gravity 1 1 instance 3 exposed
Issued
May 12, 2022
Penalty
Initial $5,811 · Current $0 Reduced
29 CFR  1910.30(a)(1):(a) Fall hazards. (1) Before any employee is exposed to a fall hazard, the employer must provide training for each employee who uses personal fall protection systems or who is required to be trained as specified elsewhere in this subpart.  Employers must ensure employees are trained in the requirements of this paragraph on or before May 17, 2017.  a) On or about January 7, 2022, the employer did not provide the fall protection training for maintenance employees who perform repair work on the hot spiral.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5811

1910.147 C06 I

Other-than-serious Gravity 5 1 instance 3 exposed
Issued
May 12, 2022
Abate by
Jun 8, 2022
Penalty
Initial $7,748 · Current $7,748
29 CFR  1910.147(c)(6)(i):The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.  a) On or about January 11, 2022, the employer did not ensure periodic inspections for the energy control procedures for presses 1 and 2 on the production line were being performed.
Recent events (2)
  • — I (O) $7748
  • — Z (S) $7748

1910.147 C07 I B

Other-than-serious Gravity 5 1 instance 2 exposed
Issued
May 12, 2022
Abate by
Jun 8, 2022
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(7)(i): The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:  29 CFR  1910.147(c)(7)(i)(B):Each affected employee shall be instructed in the purpose and use of the energy control procedure.  a) On or about January 11, 2022, the employer did not provide new employees with lock out, tag out awareness training in that employees working around the production line presses were not given comprehensive training until the annual retraining occurred.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View Richelieu Foods, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345720171.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.