LAFAYETTE, LA —
OSHA Inspection: METALCRAFT MANUFACTURING
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of METALCRAFT MANUFACTURING in 419 HIGH MEADOWS BOULEVARD, LAFAYETTE, LA 70507 (NAICS 332710). OSHA activity number 345724579.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- METALCRAFT MANUFACTURING
- Site address
- 419 HIGH MEADOWS BOULEVARD
- City
- LAFAYETTE
- State
- LA
- ZIP
- 70507
- Mailing
- 419 HIGH MEADOWS BOULEVARD, LAFAYETTE, LA 70507
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 21
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Apr 29, 2022
- Abate by
- May 16, 2022
- Penalty
- Initial $5,801 · Current $4,641 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii):Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): On or about January 13, 2022 in the shop area, employee(s) performed preventative maintenance on the Doosan CNC machine which did not have a control of hazardous energy procedures in place.
Recent events (2)
- — I (S) $4640.8
- — Z (S) $5801
1910.178 L01 I
- Issued
- Apr 29, 2022
- Abate by
- May 16, 2022
- Penalty
- Initial $5,801 · Current $4,641 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l). On or about January 13, 2022 in the shop area an employee drove a Toyota Max Cap forklift without being trained and evaluated.
Recent events (2)
- — I (S) $4640.8
- — Z (S) $5801
1910.179 G01 V
- Issued
- Apr 29, 2022
- Abate by
- May 16, 2022
- Penalty
- Initial $5,801 · Current $4,641 Reduced
General-duty citation text
29 CFR 1910.179(g)(1)(v):Pendant control boxes shall be constructed to prevent electrical shock and shall be clearly marked for identification of functions. On or about January 13, 2022, in the outside shop area employees used pendant control boxes for the overhead cranes that were not clearly marked. Instance 1) Landel 3 ton, S/N A1697 Instance 2) Landel 5 ton, S/N A2418
Recent events (2)
- — I (S) $4640.8
- — Z (S) $5801
1910.179 J03
- Issued
- Apr 29, 2022
- Abate by
- May 16, 2022
- Penalty
- Initial $5,801 · Current $4,641 Reduced
General-duty citation text
29 CFR 1910.179(j)(3):Periodic inspection. Complete inspections of the crane shall be performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section, depending upon its activity, severity of service, and environment, or as specifically indicated below. These inspections shall include the requirements of paragraph (j)(2) of this section and in addition, the following items. Any deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard: On or about January 13, 2022 in the inside/outside shop area employee(s) used damaged overhead cranes to move heavy pipe. Instance 1) Landel 3 ton, S/N A1697 Instance 2) Landel 5 ton, S/N A2418 Instance 3) Landel 3 ton, S/N A649A
Recent events (2)
- — I (S) $4640.8
- — Z (S) $5801
1910.212 A01
- Issued
- Apr 29, 2022
- Abate by
- May 16, 2022
- Penalty
- Initial $5,801 · Current $4,641 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by a lathe. On or about January 13, 2022 in the inside shop area and outside shop area employee(s) used lathes that were not equipped with a chuck guard in order to modify piping. Instance 1) Hollis Spindle Mazac Instance 2) Green Lathe Middle of the building
Recent events (2)
- — I (S) $4640.8
- — Z (S) $5801
More inspections at Metalcraft Manufacturing
View Metalcraft Manufacturing's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345724579.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.