ARGYLE, TX —
OSHA Inspection: JOEL RAMIREZ
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of JOEL RAMIREZ in 1117 KNIGHTBRIDGERD., ARGYLE, TX 76226 (NAICS 238140). OSHA activity number 345739239.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JOEL RAMIREZ
- Site address
- 1117 KNIGHTBRIDGERD.
- City
- ARGYLE
- State
- TX
- ZIP
- 76226
- Mailing
- 3208 GRADY ST., FOREST HILL, TX 76119
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Jan 26, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $1,865 · Current $1,119 Reduced
General-duty citation text
29 CFR 1926.102(a)(1):Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. On the construction site, employees engaged in cutting masonry material with a DeWalt cutoff saw was not wearing eye protection and exposed to struck-by flying particles during the cutting operations.
Recent events (2)
- — I (S) $1119
- — Z (S) $1865
1926.300 B04 II
- Issued
- Jan 26, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $1,865 · Current $1,119 Reduced
General-duty citation text
29 CFR 1926.300(b)(4)(ii): The point of operation of machine(s) whose operation exposed an employee to injury was not guarded: On the construction site, an employee operated DeWalt cutoff saw with the lower guard tied in the up position exposing employees to cuts and laceration hazards.
Recent events (2)
- — I (S) $1119
- — Z (S) $1865
1926.1153 C01
- Issued
- Jan 26, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $1,865 · Current $1,119 Reduced
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. On the construction site, the employer did not ensure employees using a DeWalt cut off saw to cut masonry material were protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (2)
- — I (S) $1119
- — Z (S) $1865
1926.1153 D02 I
- Issued
- Jan 26, 2022
- Abate by
- Feb 24, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: On the west side of the construction site, the employer did not access and protect employees from potential exposure from silica while cutting bricks with a DeWalt cutoff saw exposing employees to silica.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Joel Ramirez
View Joel Ramirez's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345739239.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.