TULSA, OK —
OSHA Inspection: HARLEY HOLLAN COMPANIES INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of HARLEY HOLLAN COMPANIES INC. in 5677 SOUTH 107TH EAST AVENUE, TULSA, OK 74146 (NAICS 562111). OSHA activity number 345771729.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARLEY HOLLAN COMPANIES INC.
- Site address
- 5677 SOUTH 107TH EAST AVENUE
- City
- TULSA
- State
- OK
- ZIP
- 74146
- Mailing
- 5677 SOUTH 107TH EAST AVENUE, TULSA, OK 74146
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562111
- Employees
- 46
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- May 13, 2022
- Abate by
- Jul 15, 2022
- Penalty
- Initial $10,151 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was not isolated from the energy source and rendered inoperative. On or about November,15, 2021, employees performed maintenance on a conveyor machine without the use of an energy control program consisting of energy control procedure(s), employee training, and periodic inspections to ensure the energy sources of the conveyor machine were safely isolated. This exposed the employees to a caught in hazard from an unexpected energizing of the conveyor machine.
Recent events (2)
- — I (S) $5000
- — Z (S) $10151
1910.147 C07 I A
- Issued
- May 13, 2022
- Abate by
- May 27, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employees did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolate. On or about November 15, 2021, employees performed maintenance to a conveyor machine and were not provided training in the recognition hazardous energy sources and the methods and means necessary for isolating that hazardous energy source. This exposed the employees to the hazard of uncontrolled energy sources.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- May 13, 2022
- Abate by
- Jul 15, 2022
- Penalty
- Initial $10,151 · Current $5,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. On or about November,15, 2021, procedures were not developed, documented, or used to ensure the control of hazardous energy during maintenance activities of a conveyor. This exposed the employees to the hazards of uncontrolled energy sources.
Recent events (2)
- — I (S) $5000
- — Z (S) $10151
1910.147 D04 I
- Issued
- May 13, 2022
- Abate by
- May 27, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees. On or about November 15, 2021, an authorized person did not affix a lockout or tagout device to the energy isolating device when employees performed maintenance activities to the conveyor machine. This exposed the employees to a caught in hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.39 A02
- Issued
- May 13, 2022
- Abate by
- May 27, 2022
- Penalty
- Initial $4,351 · Current $2,000 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): Basic Requirement. Within twenty-four (24) hours after the in-patient hospitalization of one or more employees or an employee's amputation or an employee's loss of an eye, as a result of a work-related incident, you must report the in-patient hospitalization, amputation, or loss of an eye to OSHA. An in-patient hospitalization affecting one (1) employee, occurring on or about November 15, 2021, was not reported to the local OSHA area office within the 24- hour reporting requirement.
Recent events (2)
- — I (O) $2000
- — Z (O) $4351
More inspections in this industry (NAICS 562111)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345771729.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.