Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: J. DANIEL CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of J. DANIEL CONSTRUCTION, LLC in 1619 V STREET SE, WASHINGTON, DC 20020 (NAICS 238130). OSHA activity number 345791016.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch J. Daniel Construction, LLC — free Get an email when a new federal OSHA severe-injury report for J. Daniel Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1619 V STREET SE
City
WASHINGTON
State
DC
ZIP
20020
Mailing
15130 FAIRLAWN AVE., SILVER SPRING, MD 20906
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 1 1 instance 4 exposed
Issued
Aug 16, 2022
Abate by
Aug 22, 2022
Penalty
Initial $1,865 · Current $1,865
29 CFR  1926.102(a)(1): Employees did not use eye and face protection equipment when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents:  a) On or about February 17, 2022: Employees were not wearing the eye protection provided while operating portable equipment such as but not limited to pneumatic nail-guns while conducting framing work.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet)
Recent events (1)
  • — Z (S) $1865

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Aug 16, 2022
Abate by
Aug 22, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a) On or about February 17, 2022: Employees were not wearing fall protection while working approximately 20' from the lower level while performing framing operations.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4351

1926.1053 B01

Serious Gravity 1 1 instance 2 exposed
Issued
Aug 16, 2022
Abate by
Aug 22, 2022
Penalty
Initial $1,865 · Current $1,865
29 CFR  1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a) On or about February 17, 2022: Employees were using a 6-foot Werner ladder, which was 4-feet below the landing to access the top-plate area .   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet)
Recent events (1)
  • — Z (S) $1865

1926.1053 B04

Serious Gravity 10 1 instance 2 exposed
Issued
Aug 16, 2022
Abate by
Aug 22, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  a) On or about February 17,2022: Employees were using a  Werner stepladder in the closed position to access the top plate.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet)
Recent events (1)
  • — Z (S) $0

1926.1053 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 16, 2022
Abate by
Aug 22, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.1053(b)(13): The top or top step of a stepladder was used as a step  a) On or about February 17, 2022: Employees used the top step of a Werner 6-foot  stepladder to access the top plate.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet)
Recent events (1)
  • — Z (S) $0

View J. Daniel Construction, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345791016.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.