OSHA Inspection: MARKQUART RV - HALLIE, LLC

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $5801.00 · Current $3481.00 Reduced

General-duty citation text

29 CFR  1910.106(d)(3)(ii)(a): Metal storage cabinets construction. The bottom, top, door, and sides of cabinet were not at least No. 18 gage sheet iron and double walled with 1 1/2 - inch air space. Joints were not riveted, welded or made tight by some equally effective means. The door was not provided with a three-point lock, and the door sill was not raised at least 2 inches above the bottom of the cabinet.  (a) In the west service bay; the employer was using an improperly constructed metal cabinet to store flammable liquids used in the work area.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $4351.00 · Current $2611.00 Reduced

General-duty citation text

29 CFR  1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  (a) In the east service bay; the employer did not ensure an eyewash station was immediately available where injurious corrosive liquids are used for cleaning campers.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $7252.00 · Current $4351.00 Reduced

General-duty citation text

29 CFR  1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck:  (a) At the service facility; the employer did not ensure their forklift operators completed the required training process prior to assigning the operators tasks using the forklift.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $7252.00 · Current $4351.00 Reduced

General-duty citation text

29 CFR  1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections:  (a) In the west service bay; the employer did not ensure a Black & Decker bench grinder had all the required guards installed.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  (a) In the west service bay; the employer did not ensure the Black & Decker bench grinder left wheel work rest was adjusted within one eighth of an inch to the grinding wheel surface.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  (a) In the west service bay; the employer did not ensure the Black & Decker bench grinder had adjustable tongues installed and adjusted within one fourth of an inch to the grinding wheel surface.

Issued

2022-07-08 00:00:00

Penalty

Initial $3698.00 · Current $2219.00 Reduced

General-duty citation text

29 CFR  1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:  (a) In the show room; three outlet boxes had broken or missing faceplates.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $5801.00 · Current $3481.00 Reduced

General-duty citation text

29 CFR  1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program that included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   (a) Throughout facility; the employer did not have an established hazard communication program to address hazards associated with the chemicals used in the service and maintenance areas.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.1200(g)(1): The employer did not have a safety data sheet in the workplace for each hazardous chemical which they use:  (a) Throughout facility; the employer did not provide safety data sheets for the chemicals used in the service and maintenance areas.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Throughout facility; the employer did not provide employees with training on hazardous chemicals used during RV and camper servicing and maintenance.

Issued

2022-07-08 00:00:00

Abate by

2022-07-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR  1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  (a) In the east service bay; the employer did not ensure circuit breaker #14, located in the circuit breaker panel, was labelled to indicate its purpose.