HOUSTON, TX —
OSHA Inspection: JNB MACHINE SHOP, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JNB MACHINE SHOP, INC in 20231 HEMPSTEAD ROAD, HOUSTON, TX 77065 (NAICS 332710). OSHA activity number 345814875.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JNB MACHINE SHOP, INC
- Site address
- 20231 HEMPSTEAD ROAD
- City
- HOUSTON
- State
- TX
- ZIP
- 77065
- Mailing
- 20231 HEMPSTEAD ROAD, HOUSTON, TX 77065
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 20
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- May 12, 2022
- Abate by
- Jun 1, 2022
- Penalty
- Initial $5,801 · Current $3,481 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about February 28, 2022: a. In the Milling Machine Area where employees are exposed to a struck-by hazard when operating the PUMA 300 CNC Lathe without a functional door interlock. b. In the Milling Machine Area where employees are exposed to a struck-by hazard when operating the Puma 400 CNC Lathe without a functional door interlock. c. In the Milling Machine Area where employees are exposed to a struck-by hazard when operating the MillAC 852VII CNC Lathe without a functional door interlock. d. In the Machine Shop where employees are exposed to a struck-by hazard when operating the PUMA 400 CNC - P3522010 Lathe without a functional door interlock.
Recent events (2)
- — I (S) $3480.6
- — Z (S) $5801
1910.215 A04
- Issued
- May 12, 2022
- Abate by
- May 18, 2022
- Penalty
- Initial $4,144 · Current $2,486 Reduced
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: On or about February 28, 2022, in the Milling Machine Area, where an employee was exposed to a struck by hazard when operating a JET 8 inch bench grinder with a work rest missing on the left side and the work rest on the right side being out of adjustment.
Recent events (2)
- — I (S) $2486.4
- — Z (S) $4144
1910.215 B09
- Issued
- May 12, 2022
- Abate by
- May 18, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about February 28, 2022, in the Milling Machine Area, where an employee was exposed to a struck by hazard when operating a JET 8 inch bench grinder without tongue guards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F03
- Issued
- May 12, 2022
- Abate by
- May 18, 2022
- Penalty
- Initial $4,144 · Current $2,486 Reduced
General-duty citation text
29 CFR 1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: On or about February 28, 2022, in the Machine Shop, where an employee was exposed to a caught-in hazard when walking and working near an unguarded chain and sprocket wheel.
Recent events (2)
- — I (S) $2486.4
- — Z (S) $4144
1910.242 B
- Issued
- May 12, 2022
- Abate by
- May 24, 2022
- Penalty
- Initial $4,972 · Current $2,983 Reduced
General-duty citation text
29 CFR 1910.242(b):Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: On or about February 28, 2022, in the Milling Machine Area, where an employee was exposed to a struck-by hazard when utilizing compressed air for cleaning that was not reduced to less than 30 p.s.i.
Recent events (2)
- — I (S) $2983.2
- — Z (S) $4972
More inspections at JNB Machine Shop, INC
View JNB Machine Shop, INC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345814875.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.