Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MET TECH SERVICES, INC

Programmed Related inspection · Safety discipline

On , OSHA opened a programmed Related safety inspection of MET TECH SERVICES, INC in 16537 PORTAGE STREET, JUSTIN, TX 76247 (NAICS 238160). OSHA activity number 345827943.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MET Tech Services, INC — free Get an email when a new federal OSHA severe-injury report for MET Tech Services, INC is published. One employer, no account, unsubscribe in one click.
Site address
16537 PORTAGE STREET
City
JUSTIN
State
TX
ZIP
76247
Mailing
1104 CAPITAL AVE., #100, PLANO, TX 75074
Inspection type
Programmed Related (J)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
2
Ownership type
A

5 citations on file for this inspection.

1926.501 B13

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 6, 2022
Abate by
May 4, 2022
Penalty
Initial $2,486 · Current $2,486
29 CFR  1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):  On or about March 10, 2022, and at times prior thereto, at 16537 Portage Street, Justin, TX 76247, the employer did not ensure employees were wearing fall protection while installing metal flashing at six (6) feet or more above the ground, exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $2486

1926.1053 B01

Serious Gravity 1 1 instance 2 exposed
Issued
Apr 6, 2022
Abate by
May 4, 2022
Penalty
Initial $2,486 · Current $2,486
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder.)  On or about March 10, 2022, and at times prior thereto, at 16537 Portage Street, Justin, TX 76247, the employer did not ensure employees were using the ladder side rails extended at least three (3) feet above the upper landing surface to access the roof, exposing employees to fall hazards.
Recent events (1)
  • — Z (S) $2486

1926.503 A01

Other-than-serious 1 instance 2 exposed
Issued
Apr 6, 2022
Abate by
May 4, 2022
Penalty
Initial $465 · Current $465
29 CFR  1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:   On or about March 10, 2022, and at times prior thereto, at 16537 Portage Street, Justin, TX 76247, the employer did not ensure employees installing metal flashing were trained to recognize and minimize hazards of falling.
Recent events (1)
  • — Z (O) $465

1926.503 B01

Other-than-serious 1 instance 2 exposed
Issued
Apr 6, 2022
Abate by
May 4, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.  On or about March 10, 2022, and at times prior thereto, at 16537 Portage Street, Justin, TX 76247, the employer did not ensure employees were certified in fall protection while installing metal flashing at six (6) feet or more above the ground, exposing employees to fall hazards.
Recent events (1)
  • — Z (O) $0

1926.1060 A01

Other-than-serious 1 instance 2 exposed
Issued
Apr 6, 2022
Abate by
May 4, 2022
Penalty
Initial $465 · Current $465
29 CFR  1926.1060(a)(1): The employer did not provide a training program for each employee using ladders as necessary, enabling each employee to recognize hazards related to ladders and the procedures to be followed to minimize these hazards.   On or about March 10, 2022, and at times prior thereto, at 16537 Portage Street, Justin, TX 76247, the employer did not train an employee to use an extension ladder. An employee installing metal flashings stepped onto the extension ladder's top rung, exposing the employee to fall hazards approximately six (6) feet above the ground.
Recent events (1)
  • — Z (O) $465

View MET Tech Services, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345827943.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.