Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: D-MAN DEVELOPMENT INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of D-MAN DEVELOPMENT INC. in 4525 N BEACON ST, CHICAGO, IL 60640 (NAICS 238170). OSHA activity number 345839542.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch D-Man Development INC. — free Get an email when a new federal OSHA severe-injury report for D-Man Development INC. is published. One employer, no account, unsubscribe in one click.
Site address
4525 N BEACON ST
City
CHICAGO
State
IL
ZIP
60640
Mailing
827 N MENARD AVE, CHICAGO, IL 60651
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 4, 2022
Abate by
Apr 27, 2022
Penalty
Initial $2,486 · Current $2,486
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  a)  On March 17, 2022, employees exposed to struck-by hazards from above were not wearing hard hats.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $2486

1926.102 A01

Serious Gravity 5 2 instances 1 exposed
Issued
Apr 4, 2022
Abate by
Apr 27, 2022
Penalty
Initial $3,729 · Current $3,729
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents:     a) On or about March 17, 2022, employees were exposed to eye injury while operating a pneumatic nail gun without eye protection during siding work.  b) On or about March 17, 2022, employees were exposed to eye injury while operating a DeWalt miter saw without eye protection.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $3729

1926.451 F06

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 4, 2022
Abate by
Apr 27, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6):  a) In the period between March 10, 2022, and March 17, 2022, employees were exposed to electrical hazards while erecting, dismantling, and working from pump-jack scaffolding in close proximity to a 120/240 volt overhead power line.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4351

1926.451 G01 I

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 4, 2022
Abate by
Apr 27, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:  a)  On March 17, 2022, employees working from a ladder jack scaffold were exposed to a fall hazard of approximately 17 feet.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $4351

View D-Man Development INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345839542.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.