FORT LORAMIE, OH —
OSHA Inspection: CUSTOM FOAM PRODUCTS INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CUSTOM FOAM PRODUCTS INC in 401 SOUTH MAIN STREET, FORT LORAMIE, OH 45845 (NAICS 326150). OSHA activity number 345847974.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CUSTOM FOAM PRODUCTS INC
- Site address
- 401 SOUTH MAIN STREET
- City
- FORT LORAMIE
- State
- OH
- ZIP
- 45845
- Mailing
- 401 SOUTH MAIN STREET, FORT LORAMIE, OH 45845
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326150
- Employees
- 60
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C06 I
- Issued
- Jun 30, 2022
- Abate by
- Jul 19, 2022
- Penalty
- Initial $10,151 · Current $5,075 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) Custom Foam Products Inc. on or about March 22, 2022, at the address of 401 S. Main Street Fort Loramie, OH: The employer failed to ensure that its energy control procedures and requirements were being followed by employees who are responsible/tasked with servicing equipment such as but not limited to the Edge Sweets Model LVR-3 bandsaw. Employees performing service work on this equipment were exposed to amputation hazards.
Recent events (2)
- — I (S) $5075
- — Z (S) $10151
1910.147 C07 I
- Issued
- Jun 30, 2022
- Abate by
- Jul 19, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: a) Custom Foam Products Inc. on or about March 22, 2022, at the address of 401 S. Main Street Fort Loramie, OH: The employer failed to ensure that employees who are responsible/tasked with servicing equipment such as but not limited to the Edge Sweets Model LVR-3 bandsaw, were adequately evaluated for the skills required for the appropriate application and usage of machine specific energy control procedures. Employees performing service work on this equipment were exposed to amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D06
- Issued
- Jun 30, 2022
- Abate by
- Jul 19, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(6):Prior to starting work on machines or equipment that had been locked out or tagged out, the authorized employee did not verify that isolation and de- energization of the machine or equipment had been accomplished: a) Custom Foam Products Inc. on or about March 22, 2022, at the address of 401 S. Main Street Fort Loramie, OH: The employer failed to ensure that employees who are responsible/tasked with servicing equipment such as but not limited to the Edge Sweets Model LVR-3 bandsaw. Followed energy control procedures to include verifying isolation/de-energization of equipment. Employees performing service work in this condition were exposed to amputation hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 II D
- Issued
- Jun 30, 2022
- Penalty
- Initial $7,252 · Current $3,625 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(ii)(D):Refresher training in relevant topics was not provided to the operator when the operator was assigned to drive a different type of truck: a) Custom Foam Products Inc. on or about March 22, 2022, at the address of 401 S. Main Street Fort Loramie, OH: The employer failed to ensure that employees who were initially trained on a sit down powered industrial truck then later assigned to operate a stand-up counterbalance powered industrial truck received refresher training relevant to its unique operational dynamics of the different style of truck. Employees operating in this condition were exposed to struck by hazards.
Recent events (2)
- — I (S) $3625
- — Z (S) $7252
1910.178 L04 III
- Issued
- Jun 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii):An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Custom Foam Products Inc. on or about March 22, 2022, at the address of 401 S. Main Street Fort Loramie, OH: The employer failed to ensure that employees who operated powered industrial truck were evaluated at least once every three years. Employees in this condition were exposed to struck by hazards.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 326150)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345847974.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.