HEWITT, TX —
OSHA Inspection: VICTOR ROBERTSON
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of VICTOR ROBERTSON in 841 DAY STAR DRIVE, HEWITT, TX 76643 (NAICS 238140). OSHA activity number 345859128.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VICTOR ROBERTSON
- Site address
- 841 DAY STAR DRIVE
- City
- HEWITT
- State
- TX
- ZIP
- 76643
- Mailing
- P. O. BOX 1462, MOODY, TX 76557
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Mar 25, 2022
- Abate by
- Apr 4, 2022
- Penalty
- Initial $2,486 · Current $2,486
General-duty citation text
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. At the job site, employees were not provided eye protection when operating a Bauer 7" Right Hand Angle grinder to cut brick and stone were exposed to eye injuries from flying objects.
Recent events (1)
- — Z (S) $2486
1910.134 A02
- Issued
- Mar 25, 2022
- Abate by
- Apr 4, 2022
- Penalty
- Initial $2,486 · Current $2,486
General-duty citation text
29 CFR 1910.134(a)(2): A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee: (Construction Reference 1926.103) At the jobsite, employees who were cutting masonry brick with a Baner 7" Masonry cutting grinder were not protected with personal protective equipment and exposed to respiratory hazards from the dust, silica dust and particles.
Recent events (1)
- — Z (S) $2486
1926.300 B01
- Issued
- Mar 25, 2022
- Abate by
- Apr 4, 2022
- Penalty
- Initial $2,486 · Current $2,486
General-duty citation text
29 CFR 1926.300(b)(1):When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use. At the jobsite, a guard was not installed or provided over the 7" cutting blade on the Bauer right hand angle grinder, exposing employees to the hazard of being struck by the blade.
Recent events (1)
- — Z (S) $2486
1926.1153 D02 I
- Issued
- Mar 25, 2022
- Abate by
- Apr 6, 2022
- Penalty
- Initial $2,486 · Current $2,486
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe. At the jobsite, employees operating a Bauer 7" right hand angle grinder without the guard while cutting bricks, stones and other masonry material. The employees were exposed to amputation hazards.
Recent events (1)
- — Z (S) $2486
1926.1153 C01
- Issued
- Mar 25, 2022
- Abate by
- Apr 4, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. At the construction site, the employer did not ensure that employees using a Bauer 7" angle grinder to cut bricks and stones were protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345859128.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.