Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ANGEL DANIEL ANDRADE CARDONA

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ANGEL DANIEL ANDRADE CARDONA in 7547 MILL SPRINGS DRIVE, DUBLIN, OH 43016 (NAICS 238130). OSHA activity number 345860118.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Angel Daniel Andrade Cardona — free Get an email when a new federal OSHA severe-injury report for Angel Daniel Andrade Cardona is published. One employer, no account, unsubscribe in one click.
Site address
7547 MILL SPRINGS DRIVE
City
DUBLIN
State
OH
ZIP
43016
Mailing
894 HONEY CREEK DRIVE, COLUMBUS, OH 43228
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.451 G01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 21, 2022
Abate by
May 3, 2022
Penalty
Initial $3,419 · Current $3,419
29 CFR  1926.451(g)(1):Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level.   a. Located at 7547 Mill Springs Drive in Dublin, Ohio: On or about March 28, 2022, an employee was working from the oriented strand board (OSB) sheathing stacked on the forks of a rough terrain forklift hoisted to the second story elevation. The employee was not protected from an approximately twelve-foot fall hazard while working from the makeshift platform.
Recent events (1)
  • — Z (S) $3419

1926.602 C01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 21, 2022
Abate by
May 3, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.602(c)(1)(ii):No modifications or additions which affect the capacity or safe operation of the equipment shall be made without the manufacturer's written approval. If such modifications or changes are made, the capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly. In no case shall the original safety factor of the equipment be reduced.  a. Located at 7547 Mill Springs Drive in Dublin, Ohio: On or about March 28, 2022, an employee was working from the oriented strand board (OSB) sheathing stacked on the forks of a GEHL DL6H rough terrain forklift in order to install sheathing to the exterior wall. The makeshift platform was not approved by the equipment manufacturer to hoist personnel.
Recent events (1)
  • — Z (S) $0

1926.21 B02

Repeat Gravity 5 1 instance 2 exposed
Issued
Apr 21, 2022
Abate by
May 3, 2022
Penalty
Initial $17,094 · Current $17,094
29 CFR  1926.21(b)(2):The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.  a. Located at 7547 Mill Springs Drive in Dublin, Ohio: On or about March 28, 2022, the employer did not instruct and train employees working onsite on the recognition and avoidance of hazards associated with the use of fall protection and safe use of a rough terrain forklift.   Angel Daniel Andrade Cardona was previously cited for a repeat violation of this Occupational Safety and Health standard 29 CFR 1926.21(b)(2), which was contained in OSHA inspection number 1531508, citation number 1, item number 2 and was affirmed as a final order on 06/22/2021, with respect to a workplace located at 10326 Tipperary Drive, Lot 16, Plain City, Ohio.  Angel Daniel Andrade Cardona was previously cited for a serious violation of this Occupational Safety and Health standard 29 CFR 1926.21(b)(2), which was contained in OSHA inspection number 1505595, citation number 1, item number 1 and was affirmed as a final order on 02/16/2021, with respect to a workplace located at 4172 Holstein Drive, Lot 188, Columbus, Ohio.
Recent events (1)
  • — Z (R) $17094

View Angel Daniel Andrade Cardona's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345860118.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.