Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HIGHLAND ROOFING CO INC

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of HIGHLAND ROOFING CO INC in 800 ZORN AVENUE BUILDING 7, LOUISVILLE, KY 40206 (NAICS 238160). OSHA activity number 345861447.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Highland Roofing CO INC — free Get an email when a new federal OSHA severe-injury report for Highland Roofing CO INC is published. One employer, no account, unsubscribe in one click.
Site address
800 ZORN AVENUE BUILDING 7
City
LOUISVILLE
State
KY
ZIP
40206
Mailing
4007 PRODUCE ROAD, LOUISVILLE, KY 40218
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
30
Ownership type
A

3 citations on file for this inspection.

1926.501 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 28, 2022
Penalty
Initial $10,151 · Current $6,091 Reduced
29 CFR  1926.501(b)(1):  Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  a) On or about March 28, 2022 employees were replacing a roof ladder access hatch while exposed to an unguarded edge with a fall height of approximately 15 feet to the ground below and the employer did not ensure each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.
Recent events (2)
  • — I (S) $6090.6
  • — Z (S) $10151

1926.501 B04 I

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 28, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.501(b)(4)(i):  Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:  a) On or about March 28, 2022 employees were replacing a roof ladder access hatch while exposed to an unguarded edge with a fall height of approximately 15 feet to the level below and the employer did not ensure each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.502 D15

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 28, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.502(d)(15):  Anchorage points used for attachment of personal fall arrest equipment were not independent of any anchorage point being used to support or suspend platforms and capable of supporting at least 5,000 pounds (22.2 kN) per employee:  a) On or about March 28, 2022 employees were replacing a roof ladder access hatch while exposed to an unguarded edge with a fall height of approximately 15 feet to the ground below and the employer did not ensure anchorage points used for attachment of personal fall arrest equipment were capable of supporting at least 5,000 pounds (22.2 kN) per employee.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Highland Roofing CO INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345861447.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.