Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PRO POLY OF AMERICA, INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of PRO POLY OF AMERICA, INC in 150 INDUSTRIAL DRIVE, AUGUSTA, WI 54722 (NAICS 325211). OSHA activity number 345872691.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch PRO Poly of America, INC — free Get an email when a new federal OSHA severe-injury report for PRO Poly of America, INC is published. One employer, no account, unsubscribe in one click.
Site address
150 INDUSTRIAL DRIVE
City
AUGUSTA
State
WI
ZIP
54722
Mailing
150 INDUSTRIAL DRIVE, AUGUSTA, WI 54722
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325211
Employees
18
Ownership type
A

4 citations on file for this inspection.

1910.28 B01 I

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 10, 2022
Abate by
Aug 31, 2022
Penalty
Initial $10,151 · Current $7,106 Reduced
29 CFR 1910.28(b)(1)(i):  Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i)(A)-(b)(1)(i)(C):  (a) Shop floor; One or more methods of fall protection was not in place while employees performed work on top of polyprene tanks at heights greater than 4 feet above ground level.
Recent events (2)
  • — I (S) $7105.7
  • — Z (S) $10151

1910.30 A01

Serious Gravity 10 1 instance 3 exposed
Issued
Aug 10, 2022
Abate by
Aug 31, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.30(a)(1): Before any employee is exposed to a fall hazard, the employer did not provide training for each employee who uses personal fall protection systems or who was required to be trained as specified elsewhere in this subpart:   (a) Shop floor; Employees did not receive training to inform them of the hazards of working at elevations and/or the procedures to be followed to minimize fall hazards before they were allowed to work on top of polyprene tanks.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 A04

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 10, 2022
Abate by
Aug 31, 2022
Penalty
Initial $7,252 · Current $5,076 Reduced
29 CFR 1910.178(a)(4): Modifications or additions which affect capacity and safe operation of powered industrial trucks were performed by the employer without the manufacturer's prior written approval:  (a) Shop floor; The employer did not obtain written manufacturer approval from the Nissan forklift manufacturer before using the Nissan forklift (Model #MUG1F2A30LV)  to support the addition of front-end attachment fork mounted work platform (basket).
Recent events (2)
  • — I (S) $5076.4
  • — Z (S) $7252

1910.178 A05

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 10, 2022
Abate by
Aug 31, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered:   (a) Shop floor; The Nissan forklift (Model #MUG1F2A30LV) was not marked to identify the combined weight of the truck and the fork mounted work platform (basket) at maximum elevation, with its load centered.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View PRO Poly of America, INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345872691.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.