MC ELHATTAN, PA —
OSHA Inspection: BRODART COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BRODART COMPANY in 280 NORTH ROAD, MC ELHATTAN, PA 17748 (NAICS 337127). OSHA activity number 345902274.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BRODART COMPANY
- Site address
- 280 NORTH ROAD
- City
- MC ELHATTAN
- State
- PA
- ZIP
- 17748
- Mailing
- 500 ARCH STREET, WILLIAMSPORT, PA 17701
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 110
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Sep 2, 2022
- Abate by
- Feb 28, 2023
- Penalty
- Initial $10,360 · Current $10,360
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: a) Fabrication Shop: The point of operation on the Edwards Pearson 20-ton hydraulic press brake was not guarded to prevent the operator from having their hand in the danger zone during the operating cycle, on or about May 10, 2022. b) Fabrication Shop: The point of operation on the Clausing Megobal hydraulic press brake was not guarded to prevent the operator from having their hand in the danger zone during the operating cycle, on or about May 10, 2022. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — P (S) $10360
- — I (S) $10360
- — Z (S) $10360
1910.217 C01 I
- Issued
- Sep 2, 2022
- Abate by
- Sep 29, 2022
- Penalty
- Initial $10,360 · Current $10,360
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es): a) Fabrication Shop: The point of operation on the Niagara A3, 32 ton full-revolution mechanical punch press was not guarded to prevent the operator from exposure to an amputation hazard, on or about April 18, 2022. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $10360
- — Z (S) $10360
1910.219 D01
- Issued
- Sep 2, 2022
- Abate by
- Sep 29, 2022
- Penalty
- Initial $10,360 · Current $10,360
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Fabrication Shop: Belt drive pulleys on Verson mechanical press brake were not adequately enclosed by a guard, which exposed the operator to an in-running nip point hazard, on or about May 10, 2022. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $10360
- — Z (S) $10360
1910.219 E03 I
- Issued
- Sep 2, 2022
- Abate by
- Sep 29, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a) Metal Fabrication: A pair of drive belts on the Verson mechanical press brake were not adequately enclosed which exposed the operator to potential injury from contact with the rotating belts, on or about May 10, 2022. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F01
- Issued
- Sep 2, 2022
- Abate by
- Sep 29, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii): a) Metal Fabrication: A drive gear on the left front of Verson mechanical press brake that was not fully enclosed by a guard exposed employees to an amputation hazard, on or about May 10, 2022. b) Metal Fabrication: A drive gear on the left rear of Verson mechanical press brake that was not fully enclosed by a guard exposed employees to an amputation hazard, on or about May 10, 2022. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Brodart Company
View Brodart Company's full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345902274.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.