Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: OMAR ESCOBEDO CASTILLO

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of OMAR ESCOBEDO CASTILLO in 205 BIG CREEK LOOP, HEWITT, TX 76643 (NAICS 238140). OSHA activity number 345917132.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Omar Escobedo Castillo for free Get an email when a new federal OSHA severe-injury report for Omar Escobedo Castillo is published. One employer, no account, unsubscribe in one click.
Site address
205 BIG CREEK LOOP
City
HEWITT
State
TX
ZIP
76643
Mailing
2121 JANE STREET, WACO, TX 76711
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
5
Ownership type
Private (A)

4 citations on file for this inspection.

1910.134 A02

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 22, 2022
Abate by
May 20, 2022
Penalty
Initial $2,486 · Current $1,492 Reduced
29 CFR 1910.134(a)(2):  A respirator was not provided by the employer to each employee when such equipment was necessary to protect the health of the employee: (Construction Reference 1926.103)  At the jobsite, employees who were cutting masonry brick with a Ridgid 14" masonry cutting saw were not protected with personal protective equipment and exposed to respiratory hazards from the dust, silica dust and particles.
Recent events (2)
  • · I (S) $1491.6
  • · Z (S) $2486

1926.300 B01

Serious Gravity 5 1 instance 1 exposed
Issued
Apr 22, 2022
Abate by
May 20, 2022
Penalty
Initial $2,486 · Current $1,492 Reduced
29 CFR  1926.300(b)(1):When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.  At the jobsite, a guard was not installed or provided over the 14" cutting blade on the Ridgid masonry saw, exposing employees to the hazard of being struck by the blade.
Recent events (2)
  • · I (S) $1491.6
  • · Z (S) $2486

1926.1153 C01

Serious Gravity 1 1 instance 5 exposed
Issued
Apr 22, 2022
Abate by
May 20, 2022
Penalty
Initial $1,865 · Current $1,119 Reduced
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section.   At the construction site, employees using a Ridgid 14" masonry saw to cut bricks and stones were not protected from being exposed to silica with the use of engineering controls, work practices and respiratory protection.
Recent events (2)
  • · I (S) $1119
  • · Z (S) $1865

1926.1153 D02 I

Serious Gravity 1 1 instance 5 exposed
Issued
Apr 22, 2022
Abate by
May 20, 2022
Penalty
Initial $0 · Current $0
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section:   At the residential construction site, exposure for employees using a Ridgid  14" masonry saw to cut bricks was not assessed and the exposures to silica dust eliminated.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345917132.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.