BELMONT, MS —
OSHA Inspection: COMFORT REVOLUTION MANUFACTURING OF MS LLC
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of COMFORT REVOLUTION MANUFACTURING OF MS LLC in 9 INDUSTRIAL ROAD, BELMONT, MS 38827 (NAICS 337910). OSHA activity number 345926281.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMFORT REVOLUTION MANUFACTURING OF MS LLC
- Site address
- 9 INDUSTRIAL ROAD
- City
- BELMONT
- State
- MS
- ZIP
- 38827
- Mailing
- 9 INDUSTRIAL ROAD, BELMONT, MS 38827
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337910
- Employees
- 350
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.22 A03
- Issued
- Oct 21, 2022
- Penalty
- Initial $4,490 · Current $2,245 Reduced
General-duty citation text
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. a. South Warehouse - on or about May 11, 2022, the Electrical conduit for air compressor SFC 37 was routed from the bottom of the compressor and across a walkway exposing employees to a trip hazard.
Recent events (3)
- — F (O) $2245
- — C (S) $4490
- — Z (S) $4490
1910.22 A03
- Issued
- Oct 21, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. a. Topper Line 1 - On or about May 10, 2022, the knob was removed from an abandon standpipe valve and valve stem was facing a walkway exposing employees to a punch and laceration hazard. The valve stem was head height.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.147 C07 I B
- Issued
- Oct 21, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
1910.147(c)(7)(i)(B): Each affected employee shall be instructed in the purpose and use of the energy control procedure. a. Pillow Line1 Carousel - On or about April 27, 2022, each affected employee exposed to struck-by and caught-in hazards, was not adequately instructed in the purpose of and use of the energy control procedure in the de-mold area of the carousel.
Recent events (3)
- — F (S) $14502
- — C (S) $14502
- — Z (S) $14502
1910.219 C04 I
- Issued
- Oct 21, 2022
- Penalty
- Initial $4,490 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i):Shaft ends projecting more than one-half the diameter of the shaft were not guarded by nonrotating caps or safety sleeves. a. PCM Curing Line/Pillow Line 2 - On or about May 11, 2022, the conveyor motor shaft extended approximately 3 inches from the motor exposing employees to an entanglement hazard.
Recent events (3)
- — F (S) $0
- — C (S) $4490
- — Z (S) $4490
1910.219 C04 II
- Issued
- Oct 21, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(ii): Unused keyways shall be filled up or covered. a. PCM Curing Line/Pillow Line 2 - On or about May 11, 2022, an unused keyway on the conveyor motor shaft exposed employees to an entanglement hazard.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.305 J01 I
- Issued
- Oct 21, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(1)(i):Fixtures, lampholders, lamps, rosettes, and receptacles located within 8 feet of the floor had live parts exposed to employee contact. a. Outside Receiving Office Door - On or about May 11, 2022, two electrical receptacles were located on the lower wall of the receiving office. One of the receptacles did not have a faceplate and one of the receptacles had a broken faceplate with part of the faceplate missing. Employees were exposed to an electrical hazard.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
1910.1200 F10
- Issued
- Oct 21, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(10): The employer did not ensure that workplace labels or other forms of warnings were legible. a. Production Development - On May 11, 2022, a one gallon container of chemical did not have a legible label exposing employees to an unknown chemical.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 337910)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345926281.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.