RICHMOND, TX —
OSHA Inspection: SAUL GARCIA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SAUL GARCIA in 10321 W GRAND PARKWAY SOUTH, RICHMOND, TX 77407 (NAICS 238140). OSHA activity number 345930473.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAUL GARCIA
- Site address
- 10321 W GRAND PARKWAY SOUTH
- City
- RICHMOND
- State
- TX
- ZIP
- 77407
- Mailing
- 11227 SANDSTONE ST, HOUSTON, TX 77072
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.1153 C01
- Issued
- Jun 7, 2022
- Penalty
- Initial $2,486 · Current $1,492 Reduced
9000
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1: a) At the construction site, where a DeWalt DWE402 angle grinder was used to cut laid bricks and mortar without an integrated water delivery system or dust collection system.
Recent events (2)
- — I (S) $1491.6
- — Z (S) $2486
1926.1153 D02 I
- Issued
- Jun 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a) At the construction site, where the employer did not assess the employees' exposure to respirable crystalline silica while the employees were cutting laid bricks and mortar using DeWalt DWE402 angle grinder.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Jun 7, 2022
- Abate by
- Jul 5, 2022
- Penalty
- Initial $2,486 · Current $1,492 Reduced
9010
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met (Construction Reference 1926.59): a) At the construction site, a written hazard communication program had not been developed and implemented. Employees were exposed to hazardous substances such as silica when cutting laid brick and mortars.
Recent events (2)
- — I (S) $1491.6
- — Z (S) $2486
1910.1200 G08
- Issued
- Jun 7, 2022
- Abate by
- Jul 5, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s) (Construction Reference 1926.59): a) At the construction site, where a safety data sheet (SDS) for Amerimix colored mortar, a corrosive containing silica, was not maintained.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Jun 7, 2022
- Abate by
- Jul 5, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area (Construction Reference: 1926.59): a) At the construction site, employees exposing to corrosives containing silica such as Amerimix Mortar were not provided with hazard communication training and information.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.50 G
- Issued
- Jun 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.50(g): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) At the construction site, employees working with Amerimix colored mortar were not provided with suitable facilities for quick drenching or flushing of the eyes.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.51 F01
- Issued
- Jun 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.51(f)(1): The employer did not provide adequate washing facilities for employees engaged in the application of paints, coatings, herbicides, or insecticides, or in other operations where contaminants may be harmful to the employees. Such facilities were not in near proximity to the worksite and was not equipped as to enable employees to remove such substances: a) At the construction site, the employer did not provide non-alkaline soap for employees working with Amerimix mortar, a corrosive.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Saul Garcia
View Saul Garcia's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345930473.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.