Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: FIBERGLASS SOLUTIONS, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of FIBERGLASS SOLUTIONS, LLC in 995 WAUBE LANE, GREEN BAY, WI 54304 (NAICS 326199). OSHA activity number 345931943.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Fiberglass Solutions, LLC — free Get an email when a new federal OSHA severe-injury report for Fiberglass Solutions, LLC is published. One employer, no account, unsubscribe in one click.
Site address
995 WAUBE LANE
City
GREEN BAY
State
WI
ZIP
54304
Mailing
995 WAUBE LANE, GREEN BAY, WI 54304
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326199
Employees
17
Ownership type
A

6 citations on file for this inspection.

1910.212 A03 II

Serious Gravity 10 2 instances 2 exposed
Issued
Sep 7, 2022
Penalty
Initial $5,801 · Current $5,801
29 CFR  1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.  On or about April 26, 2022, at an establishment located at 995 Waube Lane Green Bay, WI employees were exposed to caught in hazards while operating a Baileigh TS-1040P-50 table saw with no form of machine guarding installed.
Recent events (2)
  • — I (S) $5801
  • — Z (S) $5801

1910.213 S06

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 7, 2022
Abate by
Oct 5, 2022
Penalty
Initial $4,144 · Current $0 Reduced
29 CFR  1910.213(s)(6): Emphasis is placed upon the importance of maintaining cleanliness around woodworking machinery, particularly as regards the effective functioning of guards and the prevention of fire hazards in switch enclosures, bearings, and motors.  On or about April 26, 2022, at an establishment located at 995 Waube Lane Green Bay, WI employees are exposed to potential caught in hazards on a Craftsman Miter Saw SN:RUW2016.  The saw was not maintained causing the range of motion to stick throughout its operation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4144

1910.213 A12

Serious Gravity 10 3 instances 3 exposed
Issued
Sep 7, 2022
Penalty
Initial $5,801 · Current $5,801
29 CFR  1910.213(a)(12):  For all circular saws where conditions are such that there is a possibility of contact with the portion of the saw either beneath or behind the table, that portion of the saw shall be covered with an exhaust hood, or, if no exhaust system is required, with a guard that shall be so arranged as to prevent accidental contact with the saw.  On or about April 26, 2022, at an establishment located at 995 Waube Lane Green Bay, WI employees are exposed to potential caught in hazards on a Milwaukee Miter Saw SN:799B49441 1342 .  The machine guarding did not cover the exposed saw blade above the material being cut.
Recent events (2)
  • — I (S) $5801
  • — Z (S) $5801

1910.303 B02

Other-than-serious Gravity 5 2 instances 2 exposed
Issued
Sep 7, 2022
Penalty
Initial $4,144 · Current $0 Reduced
29 CFR  1910.303(b)(2):  Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.  On or about April 26, 2022, at an establishment located at 995 Waube Lane Green Bay, WI employees were exposed to electrical hazards while operating a Cummins C-140 bench grinder.  The bench grinder is located in the storage room in front of an improperly installed electrical outlet.
Recent events (2)
  • — I (O) $0
  • — Z (S) $4144

1910.305 B02 I

Other-than-serious Gravity 5 1 instance 4 exposed
Issued
Sep 7, 2022
Abate by
Oct 5, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.305(b)(2)(i):   All pull boxes, junction boxes, and fittings shall be provided with covers identified for the purpose. If metal covers are used, they shall be grounded. In completed installations, each outlet box shall have a cover, faceplate, or fixture canopy. Covers of outlet boxes having holes through which flexible cord pendants pass shall be provided with bushings designed for the purpose or shall have smooth, well-rounded surfaces on which the cords may bear.   On or about June 8, 2022, at an establishment located at 995 Waube Lane Green Bay, WI two CSHO's observed a junction box with no cover.  The junction box is located above ventilation system DC-4 and is exposing employees to possible shock hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.242 B

Other-than-serious 1 instance 1 exposed
Issued
Sep 7, 2022
Abate by
Oct 5, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.242(b):  Compressed air used for cleaning. Compressed air shall not be used for cleaning purposes except where reduced to less than 30 p.s.i. and then only with effective chip guarding and personal protective equipment.  On or about June 8, 2022, at an establishment located at 995 Waube Lane Green Bay, WI an employee was observed using compressed air to remove dust from body and clothing being exposed to struck by and impalement hazards.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Fiberglass Solutions, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345931943.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.