Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MW SUPPLY

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MW SUPPLY in 100 PROGRESS STREET, GLEN ROSE, TX 76043 (NAICS 332999). OSHA activity number 345936207.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch MW Supply — free Get an email when a new federal OSHA severe-injury report for MW Supply is published. One employer, no account, unsubscribe in one click.
Establishment
MW SUPPLY
Site address
100 PROGRESS STREET
City
GLEN ROSE
State
TX
ZIP
76043
Mailing
100 PROGRESS STREET, GLEN ROSE, TX 76043
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
15
Ownership type
A

5 citations on file for this inspection.

1910.178 L01 I

Serious Gravity 5 1 instance 3 exposed
Issued
May 13, 2022
Abate by
Jun 13, 2022
Penalty
Initial $4,144 · Current $2,486 Reduced
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):   At the establishment, employees operating power industrial trucks (forklifts) were not trained or certified to operate the equipment, exposing employees to the hazard of being struck by the lift.
Recent events (2)
  • — I (S) $2486.4
  • — Z (S) $4144

1910.212 A03 II

Serious Gravity 5 2 instances 2 exposed
Issued
May 13, 2022
Abate by
Jun 13, 2022
Penalty
Initial $4,972 · Current $2,983 Reduced
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  On or about April 22, 2022 and at times prior thereto; where employee(s) were exposed to struck-by and amputation hazards;  a) In the production shop; employee(s) operated the Piranha Ironworker machine, model number unreadable, with the guard stuck in the up position, and  b) In the assembly/receiving area; employee(s) operated a Jet horizontal band saw, serial number 15094391, that was not equipped with a guard covering the unused portion(s) of the saw blade.
Recent events (2)
  • — I (S) $2983.2
  • — Z (S) $4972

1910.1200 E01

Serious Gravity 1 1 instance 3 exposed
Issued
May 13, 2022
Abate by
Jun 13, 2022
Penalty
Initial $2,486 · Current $1,492 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   On or about April 22, 2022, and at times prior thereto, in the production area,  where employee(s) were using chemicals such as, but not limited to Sunnyside Lacquer Thinner,  Minimax Urethane/Varnish, and Rustoleum spray paints, and exposed to skin irritations and inhalation hazards.
Recent events (2)
  • — I (S) $1491.6
  • — Z (S) $2486

1910.1200 H01

Serious Gravity 1 1 instance 3 exposed
Issued
May 13, 2022
Abate by
Jun 13, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:   On or about April 22, 2022 and at times prior thereto, there was no hazard communication training provided to employees who were using chemicals such as, but not limited to Sunnyside Lacquer Thinner,  Minwax Urethane/Varnish,  and Rustoleum spray paints, exposing the employees to skin irritations and inhalation hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.37 B02

Other-than-serious 1 instance 12 exposed
Issued
May 13, 2022
Abate by
May 23, 2022
Penalty
Initial $465 · Current $279 Reduced
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit":   In the production area, an exit sign was not provided over the exit door leading to the outside of the building, exposing employees to the hazard of egress in case of fire.
Recent events (2)
  • — I (O) $279
  • — Z (O) $465

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345936207.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.