Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: QUICK PARTS

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of QUICK PARTS in 206 INFIRMARY RD., DAYTON, OH 45417 (NAICS 423140). OSHA activity number 345941686.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Quick Parts — free Get an email when a new federal OSHA severe-injury report for Quick Parts is published. One employer, no account, unsubscribe in one click.
Establishment
QUICK PARTS
Site address
206 INFIRMARY RD.
City
DAYTON
State
OH
ZIP
45417
Mailing
206 INFIRMARY RD., DAYTON, OH 45417
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423140
Employees
5
Ownership type
A

10 citations on file for this inspection.

5(a)(1)

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Jul 27, 2022
Abate by
Sep 13, 2022
Penalty
Initial $4,351 · Current $0 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushed-by hazards while salvaging parts from under the vehicles supported on top of two vans.  a) On or about May 6, 2022, Quick Parts did not ensure that employees performing manual picking operations on salvaged vehicles were protected from crush-by hazards in that employees were required to collect salvageable parts from under the vehicles stacked on top of two vans.     Among others, one feasible and acceptable method to correct this hazard includes, but is not limited to the following: 1.)Utilizing engineered vehicle garage lifts to support vehicles during the collection of salvageable material.  2) Utilizing engineered metal racking to suspend and support vehicles during the collection of salvageable material.
Recent events (3)
  • — F (S) $0
  • — C (S) $4351
  • — Z (S) $4351

1910.22 A01

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Jul 27, 2022
Abate by
Oct 26, 2022
Penalty
Initial $3,108 · Current $0 Reduced
29 CFR  1910.22(a)(1):(1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition.  a) On or about May 6, 2022,  Quick Parts did not ensure that walking surfaces of their back salvage yard were kept in a sanitary condition, in that the salvage yard was flooded with ~5 inches of mud. Employees were exposed to these hazards when accessing salvage parts from the back lot.
Recent events (3)
  • — F (S) $0
  • — C (S) $3108
  • — Z (S) $3108

1910.22 D01

Other-than-serious Gravity 5 1 instance 3 exposed
Issued
Jul 27, 2022
Abate by
Oct 26, 2022
Penalty
Initial $3,108 · Current $1,554 Reduced
29 CFR  1910.22(d)(1): (1) Walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition;  a) On or about May 6, 2022,  Quick Parts did not ensure that walking surfaces of their back salvage yard were inspected and maintained in a safe condition, in that the salvage yard was flooded with ~5 inches of mud that employees were exposed to when accessing salvage parts from the back lot.
Recent events (3)
  • — F (O) $1554
  • — C (S) $3108
  • — Z (S) $3108

1910.22 D02

Other-than-serious Gravity 5 1 instance 3 exposed
Issued
Jul 27, 2022
Abate by
Oct 26, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.22(d)(2): Inspection, maintenance, and repair. The employer must ensure:  Hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again.  If the correction or repair cannot be made immediately, the hazard must be guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired; and   a) On or about May 6, 2022,  Quick Parts did not ensure that walking surfaces of their back salvage yard, which were flooded and could not be repaired immediately, were guarded to prevent employees' access to the area.  Employees were exposed to the salvage yard which was flooded with ~5 inches of mud.
Recent events (3)
  • — F (O) $0
  • — C (S) $0
  • — Z (S) $0

1910.176 C

Serious Gravity 10 1 instance 1 exposed
Issued
Jul 27, 2022
Abate by
Aug 22, 2022
Penalty
Initial $4,351 · Current $2,176 Reduced
29 CFR  1910.176(c): Housekeeping. Storage areas shall be kept free from the accumulation of materials that constitute hazards from tripping, fire, explosion, or pest harborage. Vegetation control will be exercised when necessary.  On or about May 6, 2022,  Quick Parts did not ensure that their back storage room was kept free from the accumulation of material that constituted a fire, tripping, and explosion hazard in that the storage room was used to store, test, and charge approximately 102 salvaged lead acid batteries.
Recent events (3)
  • — F (S) $2175.5
  • — C (S) $4351
  • — Z (S) $4351

1910.178 A04

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 27, 2022
Abate by
Aug 22, 2022
Penalty
Initial $1,865 · Current $933 Reduced
29 CFR  1910.178(a)(4): Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturer's prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.    a) On or about May 6, 2022,  Quick Parts did not obtain manufacturer written approval before completing modifications such as replacing the front end bucket with an  Aim car body fork which affected the capacity and safe operations of the John Deere 644K Wheel Loader.
Recent events (3)
  • — F (S) $932.5
  • — C (S) $1865
  • — Z (S) $1865

1910.178 L01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 27, 2022
Abate by
Aug 22, 2022
Penalty
Initial $3,108 · Current $1,554 Reduced
29 CFR  1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  a) On or about May 6, 2022,  Quick Parts did not ensure all operators of their John Deer 644K Wheel Loader successfully completed training on powered industrial vehicles prior to operation.
Recent events (3)
  • — F (S) $1554
  • — C (S) $3108
  • — Z (S) $3108

1910.1200 E01

Serious Gravity 10 1 instance 2 exposed
Issued
Jul 27, 2022
Abate by
Sep 13, 2022
Penalty
Initial $4,351 · Current $2,176 Reduced
29 CFR  1910.1200(e)(1): Employers shall develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, safety data sheets, and employee information and training will be met, and which also includes the following:  a) On or about May 6, 2022,  Quick Parts did not establish and implement a written hazard communication program at the workplace for employees working with hazardous chemicals such as but not limited to gasoline (flammable), antifreeze (irritant), and battery acid (corrosive).
Recent events (3)
  • — F (S) $2175.5
  • — C (S) $4351
  • — Z (S) $4351

1910.1200 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 27, 2022
Abate by
Aug 22, 2022
Penalty
Initial $3,108 · Current $0 Reduced
29 CFR  1910.1200(g)(1): Chemical manufacturers and importers shall obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers shall have a safety data sheet in the workplace for each hazardous chemical which they use.  a)	On or about May 6, 2022,  Quick Parts did not ensure that safety data sheets for but not limited to gasoline (flammable), antifreeze (irritant), and battery acid (corrosive) were available in the workplace for employees.
Recent events (3)
  • — F (S) $0
  • — C (S) $3108
  • — Z (S) $3108

1910.132 D02

Other-than-serious 1 instance 3 exposed
Issued
Jul 27, 2022
Abate by
Aug 22, 2022
Penalty
Initial $349 · Current $175 Reduced
29 CFR  1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.  On or about May 6, 2022, the employer did not verify with a  written certification that a hazard assessment was performed addressing the chemical and physical hazards found in the workplace.
Recent events (3)
  • — F (O) $174.5
  • — C (O) $349
  • — Z (O) $349

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345941686.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.