RUSK, TX —
OSHA Inspection: ANTONIO MUNOZ ASERRADERO LLC
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of ANTONIO MUNOZ ASERRADERO LLC in 3023 FM 347 N, RUSK, TX 75785 (NAICS 321113). OSHA activity number 345944169.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Antonio Munoz Aserradero LLC — free
Get an email when a new federal OSHA severe-injury report for Antonio Munoz Aserradero LLC is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- ANTONIO MUNOZ ASERRADERO LLC
- Site address
- 3023 FM 347 N
- City
- RUSK
- State
- TX
- ZIP
- 75785
- Mailing
- 3023 FM 347 N, RUSK, TX 75785
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 32
- Ownership type
- A
Citations
10 citations on file for this inspection.
1910.22 A03
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice : (a) On or about May 6, 2022, and at times prior to and thereafter, employees walking to and from the SCRAG Shed walked over log refuse, pooled water, and mud exposing them to slip, trip, fall, and caught on hazards.
Recent events (2)
- — I (S) $7500
- — Z (S) $10151
1910.95 G05 I
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $0 Reduced
General-duty citation text
29 CFR 1910.95(g)(5)(i): The employer did not establish, within 6 months of an employee's first exposure at or above the action level, a valid baseline audiogram against which subsequent audiograms can be compared: On or about May 6, 2022, and at times prior to, employees who were exposed to an 8-hour TWA of 85 dB threshold had not been administered a baseline audiogram: (a) An operator working in the Cants Shed by the Baker Edger Saw was exposed to continuous noise levels at 80.7% of the permissible 8-hour time weighted average (TWA). The equivalent decibel (dBA) level of 80.7% is approximately 88.5dBA. Sampling was performed for 480 minutes during one shift. Zero exposure was assumed for the 0 minutes not sampled. (b) An operator working in the Scrag Shed by the 5 Head Resaw was exposed to continuous noise levels at 111% of the permissible 8-hour time weighted average (TWA). The equivalent decibel (dBA) level of 111% is approximately 90.8 dBA. Sampling was performed for 480 minutes during one shift. Zero exposure was assumed for the 0 minutes not sampled.
Recent events (2)
- — I (S) $0
- — Z (S) $10151
1910.147 C01
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On or about May 6, 2022, and at times prior to and thereafter, in the Scrag Shed, employees conducting belt replacement on the Baker saws were exposed to caught in hazards when they worked without a energy control program in place.
Recent events (2)
- — I (S) $7500
- — Z (S) $10151
1910.178 L01 I
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) On or about May 6, 2022, and at times prior to and thereafter, untrained employees operated powered industrial trucks, exposing those employees to crush by and struck by hazards.
Recent events (2)
- — I (S) $7500
- — Z (S) $10151
1910.212 A01
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about May 6, 2022, and at times prior to and thereafter, in the Scrag Shed, employees moving lumber off of the Baker Saw Edger chain conveyor belt were exposed to caught in and nip point hazards from the unguarded chain and sprocket at the end of the conveyor.
Recent events (2)
- — I (S) $7500
- — Z (S) $10151
1910.219 F03
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $7,252 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(3):Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: (a) On or about May 6, 2022, and at times prior to and thereafter, in the SCRAG Shed, employees working around the east end of the Baker Saw system were exposed to nip point hazards from an unguarded chain and sprocket system that powered a conveyor belt.
Recent events (2)
- — I (S) $0
- — Z (S) $7252
1910.265 C05 II
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.265(c)(5)(ii):Stairways were not provided with a standard handrail on at least one side or on any open side: (a) On or about May 6, 2022, and at times prior to and thereafter, the Baker Saw operator was exposed to fall hazards when he used a stairway without handrails on the open side.
Recent events (2)
- — I (S) $7500
- — Z (S) $10151
1910.265 C20 II
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $7,500 Reduced
General-duty citation text
29 CFR 1910.265(c)(20)(ii):Machine(s) that created dust, shavings, chips, or slivers during a period of time equal to or greater than one-fourth of the working day were not equipped with collecting system(s) (a) On or about May 6, 2022, and at times prior to and thereafter, in the SCRAGG Shed, employees were exposed to fire hazards from wood dust that accumulated under the Baker Saw edger and resaw. There was no collection system in place to remove the wood dust.
Recent events (2)
- — I (S) $7500
- — Z (S) $10151
1910.265 C20 VI
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $10,151 · Current $0 Reduced
General-duty citation text
29 CFR 1910.265(c)(20)(vi):Provisions were not made for daily removal of refuse: (a) On or about May 6, 2022, and at times prior to and thereafter, in the Scrag Shed, employees were exposed to fire hazards from pine log refuse that accumulated under the log deck. No provisions were made for the daily hand removal of refuse.
Recent events (2)
- — I (S) $0
- — Z (S) $10151
1904.40 A
- Issued
- Oct 19, 2022
- Abate by
- Nov 15, 2022
- Penalty
- Initial $1,450 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a):The employer did not provide an authorized government representative the records within the four business hours: (a) On or about May 6, 2022, the employer failed to provide a copy of the OSHA Form 300 for calendar years 2021 and 2022 to the Compliance Safety and Health Officer within four hours of the request.
Recent events (2)
- — I (O) $0
- — Z (O) $1450
More inspections in this industry (NAICS 321113)
Jul 15, 2026
Crawford County Hardwoods, LLC · COCHRANTON, PA
Jul 15, 2026
Crawford County Hardwoods, LLC · COCHRANTON, PA
Jul 9, 2026
Binderholz Live OAK LLC · LIVE OAK, FL
Jul 8, 2026
Clark Lumber Company, LLC · LAFAYETTE, TN
Jul 7, 2026
317744699 - Stimson Lumber Company · GASTON, OR
More inspections in TX
Jul 17, 2026
Cornelius Nurseries, INC. · RICHMOND, TX
Jul 17, 2026
Holloway Houston, INC. · HOUSTON, TX
Jul 17, 2026
Voluntary Purchasing Groups, INC. · BONHAM, TX
Jul 16, 2026
Rnwbl · SNYDER, TX
Jul 16, 2026
United Rentals, INC. · WICHITA FALLS, TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345944169.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.