DALLAS, TX —
OSHA Inspection: CARTAMUNDI DALLAS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CARTAMUNDI DALLAS, INC. in 5101 HIGHLAND PLACE DRIVE, DALLAS, TX 75236 (NAICS 339930). OSHA activity number 345957203.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Cartamundi Dallas, INC. — free
Get an email when a new federal OSHA severe-injury report for Cartamundi Dallas, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- CARTAMUNDI DALLAS, INC.
- Site address
- 5101 HIGHLAND PLACE DRIVE
- City
- DALLAS
- State
- TX
- ZIP
- 75236
- Mailing
- 5101 HIGHLAND PLACE DRIVE, DALLAS, TX 75236
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339930
- Employees
- 500
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1):The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: This violation occurred on or about May 13, 2022, where employees working at the facility and were exposed to crush-by hazards while operating a Nissan forklift truck without wearing a seat belt in the production department.
Recent events (2)
- — I (O) $14502
- — Z (S) $14502
1910.178 N04
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(n)(4):The driver did not slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver did not travel with the load trailing: (a) This violation occurred on or about May 13, 2022, in the production department where employees were exposed to struck-by hazards while forklifts were in operation.
Recent events (2)
- — I (O) $0
- — Z (S) $14502
1910.178 P01
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(p)(1):If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck was not taken out of service until it has been restored to safe operating condition: (a) This violation occurred on or about May 13, 2022, at a workplace where employees operating a powered industrial truck where the back tires are missing pieces of rubber. Employees were exposed to an industrial truck accident.
Recent events (2)
- — I (O) $0
- — Z (S) $14502
1910.147 C04 II C
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $14,502
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(C):Specific procedural steps for the placement, removal and transfer of lockout devices or tagout devices and the responsibility for them: This violation occurred on or about May 13, 2022, where the employer did not ensure the energy control of the lockout/tagout procedures were followed for the Mercury machine. Employees were exposed to an amputation hazard. (a) Mercury 1 machine, serial number: 20210601 (b) Mercury 2 machine, serial number: 20210602 (c) Mercury 3 machine, serial number: 20201201 (d) Mercury 4 machine, serial number: 20210701 (e) Mercury 5 machine, serial number: 20210702
Recent events (2)
- — I (S) $14502
- — Z (S) $14502
1910.147 C05 II D
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(D):Lockout devices and tagout devices did not indicate the identity of the employee applying the device: This violation occurred on or about May 13, 2022, where the employer did not ensure the identity of the lockout/tagout affixed on machines. Employees were exposed to an amputation hazard. (a) Mercury 1 machine, serial number: 20210601 (b) Mercury 2 machine, serial number: 20210602 (c) Mercury 3 machine, serial number: 20201201 (d) Mercury 4 machine, serial number: 20210701 (e) Mercury 5 machine, serial number: 20210702
Recent events (2)
- — I (S) $0
- — Z (S) $14502
1910.147 C07 I
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: This violation occurred on or about May 13, 2022, where the employer did not ensure employees working in the production department on the Mercury machines were provided with the required training of hazardous energy lockout/tagout. Employees were exposed to an amputation hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $14502
1910.147 D04 I
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(d)(4)(i):Lockout or tagout devices were not affixed to each isolating device by authorized employees: (a) This violation occurred on or about May 13, 2022, where employees working as machine operators in the production department and did not apply lockout/tagout devices to the Mercury 1 machine, serial number 20210601. Employees were exposed to an amputation hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $14502
1910.212 A01
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $14,502 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) This violation occurred on or about May 13, 2022, where the employer does not protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, chips and sparks; where employees were exposed to rotating parts hazards while operating the Mercury 1 machine, serial number: 20210601.
Recent events (2)
- — I (S) $0
- — Z (S) $14502
1904.39 A02
- Issued
- Sep 6, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $8,287 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: (a) This violation occurred on or about May 13, 2022, where the employer did not report to OSHA employee's workplace injury and illness incidents.
Recent events (2)
- — I (S) $0
- — Z (S) $8287
More inspections at Cartamundi Dallas, INC.
View Cartamundi Dallas, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 339930)
Apr 9, 2026
American Playworks LLC · ROSE CITY, MI
Apr 9, 2026
Dope Slimes LLC · CHEYENNE, WY
Aug 19, 2025
ECA Educational Services INC DBA ECA Science Kits · COMMERCE TOWNSHIP, MI
Jul 2, 2025
Cartamundi Dallas, INC. · DALLAS, TX
Feb 19, 2025
Crisloid, LLC · PROVIDENCE, RI
More inspections in TX
Jul 17, 2026
Cornelius Nurseries, INC. · RICHMOND, TX
Jul 17, 2026
Holloway Houston, INC. · HOUSTON, TX
Jul 17, 2026
Voluntary Purchasing Groups, INC. · BONHAM, TX
Jul 16, 2026
Rnwbl · SNYDER, TX
Jul 16, 2026
United Rentals, INC. · WICHITA FALLS, TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345957203.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.