EAGLE, WI ·
OSHA Inspection: SUMMERSET MARINE CONSTRUCTION L.L.C.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SUMMERSET MARINE CONSTRUCTION L.L.C. in W357S8715 CHAPMAN LANE, EAGLE, WI 53119 (NAICS 237990). OSHA activity number 345971659.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUMMERSET MARINE CONSTRUCTION L.L.C.
- Site address
- W357S8715 CHAPMAN LANE
- City
- EAGLE
- State
- WI
- ZIP
- 53119
- Mailing
- W357S8715 CHAPMAN LANE, EAGLE, WI 53119
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237990
- Employees
- 68
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 21, 2022
- Abate by
- Nov 2, 2022
- Penalty
- Initial $10,151 · Current $10,151
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Respondent failed to furnish employees a place of employment free from recognized hazards that are causing or are likely to cause death or serious physical harm. (a) On or about May 19, 2022, an employee was conducting MIG welding repairs on the front end of an approximately 30- foot- long aluminum barge. The employer did not ensure that the area was free from hazards involved with a fuel tank in performing hot work welding operations related to boat repair.
Recent events (3)
- · F (S) $10151
- · C (S) $10151
- · Z (S) $10151
1910.252 A02 VI C
- Issued
- Oct 21, 2022
- Abate by
- Nov 2, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(2)(vi)(C): Cutting or welding was permitted in the presence of explosive atmospheres (mixture of flammable gases, vapors, liquids, or dusts with air), or explosive atmospheres that could develop inside uncleaned or improperly prepared tanks or equipment which had previously contained such materials, or that could develop in areas with an accumulation. (a) On or about May 19, 2022, employees were conducting MIG welding repairs on the front end of an approximately 30 foot long aluminum barge. The employer did not ensure all gasoline was drained from the internal gasoline tank and cleaned to ensure a flammable atmosphere could not develop, before performing welding operations. This exposed employees to an explosive atmosphere, and burn and struck-by hazards.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1910.252 A02 VII
- Issued
- Oct 21, 2022
- Abate by
- Nov 2, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(2)(vii): Where practicable, combustible materials were not relocated at least 35 feet (10.7 m) from the cutting or welding operation work site. (a) On or about May 19, 2022, employees were conducting MIG welding repairs on the front end of an approximately 30 foot long aluminum barge. The barge internal fuel tank was located within 30 feet of the MIG welding being performed on the front end of the barge. This exposed employees to an explosive atmosphere, and burn and struck-by hazards.
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 237990)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 345971659.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.