Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: STEVE'S SHEET METAL

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of STEVE'S SHEET METAL in 53-04 ROOSEVELT AVENUE, WOODSIDE, NY 11377 (NAICS 332322). OSHA activity number 345983506.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Steve'S Sheet Metal — free Get an email when a new federal OSHA severe-injury report for Steve'S Sheet Metal is published. One employer, no account, unsubscribe in one click.
Establishment
STEVE'S SHEET METAL
Site address
53-04 ROOSEVELT AVENUE
City
WOODSIDE
State
NY
ZIP
11377
Mailing
53-04 ROOSEVELT AVENUE, WOODSIDE, NY 11377
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332322
Employees
5
Ownership type
A

7 citations on file for this inspection.

1910.133 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 3, 2022
Abate by
Dec 22, 2022
Penalty
Initial $3,108 · Current $1,500 Reduced
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation;  (A) On or about May 26, 2022 at 53-04 Roosevelt Avenue, Woodside, NY 11377  Employees required to use hand held angle grinders while cleaning and polishing metal pieces were not provided with appropriate eye and face protection.   ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19.
Recent events (3)
  • — F (S) $1500
  • — C (S) $3108
  • — Z (S) $3108

1910.212 A01

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 3, 2022
Abate by
Dec 22, 2022
Penalty
Initial $3,108 · Current $1,500 Reduced
29 CFR  1910.212(a)(1):One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  A) On or about May 26, 2022 Roosevelt Avenue, Woodside, NY 11377  The employer failed to ensure a bending press brake used by employees was properly guarded at the point of operation exposing employees to amputation hazards.   ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
  • — F (S) $1500
  • — C (S) $3108
  • — Z (S) $3108

1910.215 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 3, 2022
Abate by
Nov 16, 2022
Penalty
Initial $3,108 · Current $1,500 Reduced
29 CFR 1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard(s)  A) On or about May 26, 2022 at 53-04 Roosevelt Avenue, Woodside, NY 11377  Employees were observed using a hand held portable grinder without a guard to clean and polish sheet metal exposing employees to flying particles.  ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
  • — F (S) $1500
  • — C (S) $3108
  • — Z (S) $3108

1910.217 B07 X

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 3, 2022
Abate by
Dec 22, 2022
Penalty
Initial $3,108 · Current $1,500 Reduced
29 CFR  1910.217(b)(7)(x):Foot operated tripping control(s) used mechanical power press(es) with part revolution clutches were not protected to prevent operation from falling or moving objects, or from unintended operation by accidental stepping onto the petal:  A) On or about May 26, 2022 at 53-04 Roosevelt Avenue, Woodside, NY 11377  The foot petal of a part revolution mechanical press brake used by employees during the manufacturing of metal food trucks was observed missing a cover.  ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
  • — F (S) $1500
  • — C (S) $3108
  • — Z (S) $3108

1910.1200 E01

Other-than-serious 1 instance 3 exposed
Issued
Nov 3, 2022
Abate by
Dec 22, 2022
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  A.) On or about May 26, 2022 at 53-04 Roosevelt Avenue, Woodside, NY 11377  The employer failed to develop, implement and maintain at the workplace a written hazard communication program for employees that are required to use hazardous chemicals such as but not limited to soldering liquid during the fabrication of food vending carts.  ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 3 exposed
Issued
Nov 3, 2022
Abate by
Dec 22, 2022
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work  shift to employees when they were in their work area(s):  A.) On or about May 26, 2022 at 53-04 Roosevelt Avenue, Woodside, NY 11377  The employer failed to ensure safety data sheets were readily accessible to employees that are required to use hazardous chemicals, such as but not limited to, soldering liquid during the fabrication of metal food venting carts.  ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 4 exposed
Issued
Nov 3, 2022
Abate by
Dec 22, 2022
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  A.) On or about May 26, 2022 at 53-04 Roosevelt Avenue, Woodside, NY 11377  The employer failed to provide effective information and training to employees that are required to use hazardous chemicals such as but not limited to;  soldering liquid, during the fabrication of metal food venting carts.  ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19
Recent events (3)
  • — F (O) $0
  • — C (O) $0
  • — Z (O) $0

View Steve'S Sheet Metal's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345983506.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.