PLEASANT HOPE, MO —
OSHA Inspection: MISSOURI PRIME
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of MISSOURI PRIME in 5305 HIGHWAY H, PLEASANT HOPE, MO 65725 (NAICS 311612). OSHA activity number 345987440.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MISSOURI PRIME
- Site address
- 5305 HIGHWAY H
- City
- PLEASANT HOPE
- State
- MO
- ZIP
- 65725
- Mailing
- P.O. BOX 359, PLEASANT HOPE, MO 65725
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311612
- Employees
- 250
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Nov 9, 2022
- Abate by
- Dec 7, 2022
- Penalty
- Initial $11,188 · Current $6,713 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause serious physical harm to employees, in that employees were operating forklifts without utilizing the seat belts present. At the worksite located at 5305 Hwy H, Pleasant Hope, Missouri: Employees were exposed to struck by hazards when operating a forklift in the yard without the use of the installed seatbelt. Employees are engaged in operating Unicarriers Sit down powered industrial trucks in the yard every day. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS: (a) Ensure that employees operating a forklift are utilizing a seat belt as required by ASME B56.1-1993. (b) Develop and implement a disciplinary action program and procedures as means of ensuring employees follow safety protocols such as wearing a seat belt while operating these vehicles. (c) Review the company's current forklift training program to ensure it addresses the struck-by, roll over and caught between hazards related to operating a forklift and apply recommended safety measures to ensure safe operation of the vehicle. (d) Have a management official conduct period unannounced forklift inspections while being operated by a certified operator.
Recent events (2)
- — I (S) $6712.8
- — Z (S) $11188
1910.212 A01
- Issued
- Nov 9, 2022
- Abate by
- Dec 7, 2022
- Penalty
- Initial $13,052 · Current $7,831 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At the worksite located at 5305 Hwy H, Pleasant Hope, Missouri: Employees are exposed to amputation hazards when operating the Biro band saw, with unused portions of the blade not guarded, when cutting omasum.
Recent events (2)
- — I (S) $7831.2
- — Z (S) $13052
1910.303 G02 I
- Issued
- Nov 9, 2022
- Abate by
- Dec 7, 2022
- Penalty
- Initial $13,052 · Current $7,180 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Live parts of electric equipment operating at 50 volts, or more were not guarded against accidental contact by approved cabinets or other forms of approved enclosures, or other means listed under this provision: At the worksite located at 5305 Hwy H, Pleasant Hope, Missouri: Employees were exposed to serious shock, burn and or electrocution injuries in that the electrical equipment operating at 50 volts or more was not guarded or enclosed to protect from accidental contact in the electrical room.
Recent events (2)
- — I (S) $7179.7
- — Z (S) $13052
1910.305 B02 I
- Issued
- Nov 9, 2022
- Abate by
- Dec 7, 2022
- Penalty
- Initial $7,458 · Current $4,102 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: At the worksite located at 5305 Hwy H, Pleasant Hope, Missouri: Employees were exposed to electrical shock hazards in that the electrical outlet located above the door to the engine room was missing a cover, faceplate or fixture canopy.
Recent events (2)
- — I (S) $4101.9
- — Z (S) $7458
More inspections in this industry (NAICS 311612)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345987440.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.