VESTAL, NY —
OSHA Inspection: BARNEY & DICKERSON INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BARNEY & DICKERSON INC in 520 PRENTICE ROAD, VESTAL, NY 13850 (NAICS 327320). OSHA activity number 345991327.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BARNEY & DICKERSON INC
- Site address
- 520 PRENTICE ROAD
- City
- VESTAL
- State
- NY
- ZIP
- 13850
- Mailing
- 520 PRENTICE ROAD, VESTAL, NY 13850
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327320
- Employees
- 32
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 D02
- Issued
- Nov 18, 2022
- Penalty
- Initial $4,351 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(d)(2): The employer did not ensure hazardous conditions on walking working surfaces were corrected, repaired or guarded before an employee used the walking-working surface. a) At the NW End of the Maintenance Shop, on or about 6/1/2022: An unguarded floor opening (measuring 12" x 12") exposed workers to trip and fall hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $4351
1910.147 C04 I
- Issued
- Nov 18, 2022
- Abate by
- Dec 5, 2022
- Penalty
- Initial $5,801 · Current $3,775 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section. a) At the Maintenance Shop, on or about 6/1/2022: The employer did not develop procedures to ensure lockout and energy control. Employees perform servicing and maintenance activities on the stationary power washer which has multiple energy sources including pneumatic, electric and thermal.
Recent events (2)
- — I (S) $3774.55
- — Z (S) $5801
1910.151 C
- Issued
- Nov 18, 2022
- Penalty
- Initial $4,351 · Current $2,828 Reduced
General-duty citation text
29 CFR 1910.151(c):When the eyes or body of any person were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) At the Ready-Mix Building & Maintenance Areas, on or about 6/2/2022: Suitable facilities for quick drenching or flushing of the eyes were not provided in the immediate work area for emergency use for employees using corrosives and irritants such as but not limited to sodium hydroxide, sand and gravel, and master glenium.
Recent events (2)
- — I (S) $2828.15
- — Z (S) $4351
1910.212 A01
- Issued
- Nov 18, 2022
- Penalty
- Initial $5,801 · Current $3,771 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) At the Machine Shop, on or about 6/1/2022: The employer permitted workers to operate a Delta bandsaw without a guard, exposing the employee to the point of operation. b) At the Machine Shop, on or about 6/1/2022: The employer permitted workers to operate an Allen Drill Mill without a guard, exposing the employee to the rotating bit.
Recent events (2)
- — I (S) $3770.65
- — Z (S) $5801
1910.212 B
- Issued
- Nov 18, 2022
- Abate by
- Dec 5, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) At the Machine Shop, on or about 6/1/2022: The employer permitted workers to operate a Delta bandsaw without it being secured, bolted or anchored to the floor.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 327320)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345991327.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.