Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WEATHER SHIELD MFG., INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of WEATHER SHIELD MFG., INC. in 642 SOUTH WHELEN AVENUE, MEDFORD, WI 54451 (NAICS 321911). OSHA activity number 346013154.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Weather Shield MFG., INC. — free Get an email when a new federal OSHA severe-injury report for Weather Shield MFG., INC. is published. One employer, no account, unsubscribe in one click.
Site address
642 SOUTH WHELEN AVENUE
City
MEDFORD
State
WI
ZIP
54451
Mailing
P.O. BOX 309, MEDFORD, WI 54451
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321911
Employees
240
Ownership type
A

5 citations on file for this inspection.

1910.147 D02

Serious Gravity 5 1 instance 6 exposed
Issued
Aug 31, 2022
Abate by
Sep 15, 2022
Penalty
Initial $7,748 · Current $3,874 Reduced
29 CFR  1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:  (a) Electronic department; The written energy isolation procedures for isolating and affixing lockout devices were not utilized before cleaning activities were performed on a Black Brothers glue roller, Equipment #M0329.
Recent events (2)
  • — I (S) $3874
  • — Z (S) $7748

1910.213 A09

Serious Gravity 1 1 instance 6 exposed
Issued
Aug 31, 2022
Abate by
Sep 15, 2022
Penalty
Initial $5,811 · Current $2,906 Reduced
29 CFR  1910.213(a)(9): All belts, pulleys, gears, shafts, and moving parts were not guarded in accordance with the specific requirements of 1910.219:  (a) Electronic department; A sprocket that guides a drive chain for a mechanically driven ram was not guarded on the Rosenquist, Inc. electronic glue machine, model #50KWGEN, serial #206RB131251-50K.
Recent events (2)
  • — I (S) $2905.5
  • — Z (S) $5811

1910.213 R01

Serious Gravity 5 1 instance 6 exposed
Issued
Aug 31, 2022
Abate by
Sep 15, 2022
Penalty
Initial $7,748 · Current $3,874 Reduced
29 CFR  1910.213(r)(1): Feed rolls of roll type glue spreader(s) were not guarded by a semicylindrical guard:  (a) Electronic department; The Black Brothers glue roller, equipment #M0329, did not have adequate guarding to prevent employees from accessing the ingoing nip point created by the glue roll in-feed.
Recent events (2)
  • — I (S) $3874
  • — Z (S) $7748

1910.213 R04

Serious Gravity 10 1 instance 6 exposed
Issued
Aug 31, 2022
Abate by
Sep 15, 2022
Penalty
Initial $14,502 · Current $7,251 Reduced
29 CFR  1910.213(r)(4): Suitable guard(s) were not provided to reduce to a minimum the hazard due to the point of operation of an electronic glue machine:  (a) Electronic Department; At approximately 8:00 a.m., on or about May 31, 2022, an electronic department employee suffered an amputation injury while removing a press block from an inadequately guarded Rosenquist, Inc. electronic glue machine, model #50KWGEN, serial #206RB131251-50K. The employee's thumb was caught between the press block and the metal guiderail when a chain driven ram was activated and pushed the next set of door stiles on the glue machine line forward.
Recent events (2)
  • — I (S) $7251
  • — Z (S) $14502

1910.147 C05 II

Other-than-serious 1 instance 6 exposed
Issued
Aug 31, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.147(c)(5)(ii): Lockout devices and tagout devices were not used for lockout and tagout purposes only:  (a) Electronic Department; A lockout lock was improperly used to keep a rolling table stationary during normal operation of the Rosenquist, Inc. electronic glue machine, model #50KWGEN, serial #206RB131251-50K.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Weather Shield MFG., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346013154.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.