Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GEORGE L SANCHEZ

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of GEORGE L SANCHEZ in LOT 1467 CLAREMONT CT, MILLSBORO, DE 19966 (NAICS 238130). OSHA activity number 346045172.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch George L Sanchez — free Get an email when a new federal OSHA severe-injury report for George L Sanchez is published. One employer, no account, unsubscribe in one click.
Establishment
GEORGE L SANCHEZ
Site address
LOT 1467 CLAREMONT CT
City
MILLSBORO
State
DE
ZIP
19966
Mailing
57 JOYCE KILMER AVE, SUITE 2, NEW BRUNSWICK, NJ 08901
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

7 citations on file for this inspection.

1926.50 D01

Serious Gravity 5 1 instance 4 exposed
Issued
Dec 22, 2022
Penalty
Initial $3,729 · Current $3,729
29 CFR 1926.50(d)(1): First aid supplies were not accessible to the employees at the site.  a) Lot 1467 Claremont CT, Millsboro, DE 19966 (Rear): On or about June 28, 2022, the employer did not provide first aid kit/supplies to employees working with materials and equipment that could cause injuries including but not limited to bleeding injuries.
Recent events (1)
  • — Z (S) $3729

1926.150 A01

Serious Gravity 1 1 instance 4 exposed
Issued
Dec 22, 2022
Penalty
Initial $1,865 · Current $1,865
29 CFR 1926.150(a)(1): The employer did not develop and maintain a fire protection program to be followed throughout all phases of construction and residential framing work, and did not provide for the firefighting equipment as specified in this subpart:  a) Lot 1467 Claremont CT, Millsboro, DE 19966: On or about June 28 2022, the employer failed to provide a fire protection plan where employees worked with flammable materials including but not limited to gasoline, wood, paper and where ignition sources were present including but not limited to heat and spark producing equipment. The employer also failed to ensure that employees knew what to do in the event of a fire.
Recent events (1)
  • — Z (S) $1865

1926.501 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Dec 22, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.7 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):   a) Lot 1467 Claremont CT, Millsboro, DE 19966: On or about June 28, 2022, the employer failed to ensure employees conducting framing activities on a residential structure, approximately 15-20 feet above grade, used fall protection.
Recent events (1)
  • — Z (S) $4351

1926.503 A01

Serious Gravity 5 1 instance 4 exposed
Issued
Dec 22, 2022
Abate by
Jan 20, 2023
Penalty
Initial $3,729 · Current $3,729
29 CFR 1926.503(a)(1): The employer did not train each employee who might be exposed to fall hazards to enable them to recognize fall hazards and the procedures to be followed in order to minimize these hazards:  a) Lot 1467 Claremont  CT, Millsboro, DE 19966: On or about June 28, 2022, the employer did not instruct employees on the recognition and avoidance of fall hazards including applicable regulations in construction.  Abatement Note: The training program must enable the employees to recognize the hazards of falling and must train each employee in the procedures to be followed in order to minimize these hazards. Each employee must be trained by a competent person in the following: 1. The nature of fall hazards in the work area; 2. The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used; 3. The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used; 4. The role of each employee in the safety monitoring system when this system is used; 5. The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs; 6. The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection; 7. The role of employees in fall protection plans; 8. The standards contained in this subpart. The employer must verify compliance with paragraph (a) of this section by preparing a written certification record that will contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.
Recent events (1)
  • — Z (S) $3729

1926.1060 A

Serious Gravity 5 1 instance 4 exposed
Issued
Dec 22, 2022
Abate by
Jan 20, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.1060(a): The employer shall provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards.  a) Lot 1467 Claremont  CT, Millsboro, DE 19966: On or about June 28, 2022, the employer did not instruct employees on the recognition and avoidance of ladder use hazards including applicable regulations.  Abatement Note: The training program must enable the employees to recognize the hazards of falling and must train each employee in the procedures to be followed in order to minimize these hazards. Each employee must be trained by a competent person in the following: 1. The nature of fall hazards in the work area; 2. The correct procedures for erecting, maintaining, disassembling, and inspecting the fall protection systems to be used; 3. The use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used; 4. The role of each employee in the safety monitoring system when this system is used; 5. The limitations on the use of mechanical equipment during the performance of roofing work on low-sloped roofs; 6. The correct procedures for the handling and storage of equipment and materials and the erection of overhead protection; 7. The role of employees in fall protection plans; 8. The standards contained in this subpart. The employer must verify compliance with paragraph (a) of this section by preparing a written certification record that will contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer.
Recent events (1)
  • — Z (S) $0

1926.1053 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Dec 22, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to upper landing surfaces, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladders were used to gain access.  a) Lot 1467 Claremont  CT, Millsboro, DE 19966: On or about June 28, 2022, employees conducting framing activities used a 6 foot fiberglass A-Frame ladder that did not extend at least three feet above the upper landing to access a walls.
Recent events (1)
  • — Z (S) $4351

1926.1053 B13

Serious Gravity 10 1 instance 4 exposed
Issued
Dec 22, 2022
Penalty
Initial $0 · Current $0
29 CFR  1926.1053(b)(13): The top or top step of a stepladder was used as a step:  a) Lot 1467 Claremont  CT, Millsboro, DE 19966: On or about June 28, 2022,  employees conducting framing activities used top steps of a 6 foot fiberglass A-Frame ladder to access a wall to climb approximately 20 feet to upper landing.
Recent events (1)
  • — Z (S) $0

View George L Sanchez's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346045172.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.