Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RUSH REPAIRS & RECOVERY, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of RUSH REPAIRS & RECOVERY, LLC in 1137 E. MCPHERSON HIGHWAY, CLYDE, OH 43410 (NAICS 811111). OSHA activity number 346045982.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Rush Repairs & Recovery, LLC — free Get an email when a new federal OSHA severe-injury report for Rush Repairs & Recovery, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1137 E. MCPHERSON HIGHWAY
City
CLYDE
State
OH
ZIP
43410
Mailing
1137 E. MCPHERSON HIGHWAY, CLYDE, OH 43410
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811111
Employees
13
Ownership type
A

6 citations on file for this inspection.

1910.177 C01

Deleted Serious Gravity 10 1 instance 6 exposed
Issued
Oct 28, 2022
Abate by
Nov 16, 2022
Penalty
Initial $5,801 · Current $0 Reduced
29 CFR  1910.177(c)(1):The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels:  Rush Repairs & Recovery, LLC - Clyde, Ohio: On or about June 21, 2022, the employer did not train employees in the hazards of servicing rim wheels.  Employees were exposed to struck-by hazards when servicing rim wheels in that they were not trained in safe operating procedures described in paragraph (g) of this section, such as but not limited to, using a rubber lubricant prior to assembling a wheel rim, utilization of a restraining device, and the hazards of working within the trajectory during inflation steps.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5801

1910.177 C02

Serious Gravity 10 1 instance 6 exposed
Issued
Oct 28, 2022
Abate by
Nov 16, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.177(c)(2):The employer did not assure that each employee demonstrated his ability to safely service rim wheels by effective performance of all tasks listed in 29 CFR 1910.177(c)(2)(i) through (viii):  Rush Repairs & Recovery, LLC - Clyde, Ohio: On or about June 21, 2022, the employer did not ensure that employees who serviced wheel rims demonstrated safe performance of servicing tasks such as, but not limited to, inspection of rim wheel components, use of rubber lubricant, use of a restraining device, and remaining outside of the trajectory during inflation and inspections.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 D04

Serious Gravity 10 1 instance 6 exposed
Issued
Oct 28, 2022
Abate by
Nov 4, 2022
Penalty
Initial $5,801 · Current $3,480 Reduced
29 CFR  1910.177(d)(4):The employer did not furnish or assure that employees use an air line assembly which includes a clip-on chuck, an inline valve with a pressure gauge or a presettable regulator, and a sufficient length of hose between the clip-on chuck and the in-line valve (if one is used) to allow the employee to stand outside the trajectory.  Rush Repairs & Recovery, LLC - Clyde, Ohio: On or about June 21, 2022, employees were exposed to struck-by injuries in that a clip-on chuck, in-line valve with pressure gauge and sufficient length hose was not provided and/or used to allow an employee to stand outside of the trajectory while inflating a tire(s).  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $3480
  • — Z (S) $5801

1910.177 G08

Serious Gravity 10 1 instance 6 exposed
Issued
Oct 28, 2022
Abate by
Nov 4, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.177(g)(8): The employer did not ensure that employees stay out of the trajectory when inflating a tire on a single piece rim wheel:  Rush Repairs & Recovery, LLC - Clyde, Ohio: On or about June 21, 2022, the employer did not ensure that employees remained outside the trajectory when inflating a tire for a single piece rim.  An employee who was within a tire's trajectory was injured when a tired failed during inflation.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.177 G03

Serious Gravity 10 1 instance 6 exposed
Issued
Oct 28, 2022
Abate by
Nov 4, 2022
Penalty
Initial $5,801 · Current $3,480 Reduced
29 CFR  1910.177(g)(3):The employer did not ensure that employees apply nonflammable rubber lubricant to bead and wheel mating surfaces before assembly of rim wheels.  Rush Repairs & Recovery, LLC - Clyde, Ohio:  On or about June 21, 2022, employees were exposed to struck-by hazards in that a nonflammable rubber lubricant was not applied for a proper seal, prior to mounting a tire on a single piece rim wheel.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
  • — I (S) $3480
  • — Z (S) $5801

1910.177 G06

Serious Gravity 10 1 instance 6 exposed
Issued
Oct 28, 2022
Penalty
Initial $5,801 · Current $3,481 Reduced
29 CFR  1910.177(g)(6):Tires on single piece rim wheels were not contained within a restraining device, positioned behind a barrier or bolted on the vehicle with the lug nuts fully tightened during tire inflation.  Rush Repairs & Recovery, LLC - Clyde, Ohio: On or about June 21, 2022, the employer did not ensure that tires were contained in a restraining device during inflation, exposing employees to struck-by hazards. An employee was hospitalized after being struck by a tire that failed during the mounting process.     No additional abatement information is needed for this item.
Recent events (2)
  • — I (S) $3481
  • — Z (S) $5801

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346045982.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.