GLENVIEW, IL —
OSHA Inspection: L MORALES CONSTRUCTION CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of L MORALES CONSTRUCTION CO. in 2456 SARANAC LN, GLENVIEW, IL 60026 (NAICS 238160). OSHA activity number 346048002.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- L MORALES CONSTRUCTION CO.
- Site address
- 2456 SARANAC LN
- City
- GLENVIEW
- State
- IL
- ZIP
- 60026
- Mailing
- 213 N JACKSON ST, WAUKEGAN, IL 60085
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.100 A
- Issued
- Jul 13, 2022
- Penalty
- Initial $2,486 · Current $1,243 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets. a) On or about June 23, 2022, employees were exposed to struck by hazards while working in hoist operations. Employees were not wearing protective helmets where there was a possible danger of head injury from falling objects. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $1243
- — Z (S) $2486
1926.102 A01
- Issued
- Jul 13, 2022
- Penalty
- Initial $3,729 · Current $1,865 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: a) On or about June 23, 2022, employees were exposed to eye injury while operating a pneumatic nail gun without eye protection during roofing work. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $1864.5
- — Z (S) $3729
1926.501 B03
- Issued
- Jul 13, 2022
- Penalty
- Initial $4,351 · Current $2,176 Reduced
General-duty citation text
29 CFR 1926.501(b)(3): Each employee in a hoist area was not protected from falling 6 feet (1.8m) or more to lower levels by guardrail systems or personal fall arrest systems: a) On or about June 23, 2022, employee(s) was exposed to fall hazards of approximately 14 feet while working in a hoist area. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $2175.5
- — Z (S) $4351
1926.501 B13
- Issued
- Jul 13, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) On or about June 23, 2022, employees were exposed to fall hazards while working without fall protection from a pitched roof having a ground to eave height of approximately 9 feet with a 10/12 pitch, a front ridge height (garage) of approximately 18 feet and a side ridge height (main house) of approximately 25 feet. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1053 B01
- Issued
- Jul 13, 2022
- Penalty
- Initial $3,729 · Current $1,865 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: a) On or about June 23, 2022, employees were using an A-frame ladder which did not extend 3 feet above the upper landing being accessed. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $1864.5
- — Z (S) $3729
More inspections at L Morales Construction CO.
View L Morales Construction CO.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346048002.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.