IVYLAND, PA —
OSHA Inspection: EASTERN WEB HANDLING INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of EASTERN WEB HANDLING INC in 66 VINCENT CIRCLE, IVYLAND, PA 18974 (NAICS 326199). OSHA activity number 346054109.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EASTERN WEB HANDLING INC
- Site address
- 66 VINCENT CIRCLE
- City
- IVYLAND
- State
- PA
- ZIP
- 18974
- Mailing
- 66 VINCENT CIRCLE, IVYLAND, PA 18974
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 7
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.106 D03 I
- Issued
- Nov 8, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $2,486 · Current $1,243 Reduced
General-duty citation text
29 CFR 1910.106(d)(3)(i): More than 120 gallons of Class III flammable liquids were stored in a storage cabinet: (a) Ink Storage Trailer: On or about June 28, 2022, employees worked throughout the production work area near flammable liquids being stored in a trailer docked at the building. The quantity of flammable liquids exceeded the storage threshold of 120 gallons.
Recent events (2)
- — I (S) $1243
- — Z (S) $2486
1910.147 C01
- Issued
- Nov 8, 2022
- Penalty
- Initial $2,486 · Current $1,243 Reduced
General-duty citation text
29 CFR 1910.147(c)(1):The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Production Work Area: On or about June 28, 2022, employees operated a Titan Slitter machine where lockout/tag out hardware was used, but the company's lockout/tag out program had not been developed, exposing employees to injury.
Recent events (2)
- — I (S) $1243
- — Z (S) $2486
1910.147 C04 I
- Issued
- Nov 8, 2022
- Penalty
- Initial $2,486 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Production Work Area: On or about June 28, 2022, an employee operated a Titan Slitter machine where lockout/tag out hardware was used, but the company's lockout/tag out machine specific procedures had not been developed, exposing employees to injury.
Recent events (2)
- — I (S) $0
- — Z (S) $2486
1910.147 C07 I
- Issued
- Nov 8, 2022
- Penalty
- Initial $2,486 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Production Work Area: On or about June 28, 2022, employees operated a Titan Slitter machine where lockout/tag out hardware was used, but employees had not been provided lockout/tag out training, exposing employee to injury.
Recent events (2)
- — I (S) $0
- — Z (S) $2486
1910.212 A01
- Issued
- Nov 8, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $2,486 · Current $1,243 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, or flying chips: (a) Production Work Area: On or about June 28, 2022, employees operated a Titan Slitter machine which had unguarded in-going rollers, exposing the operator to entanglement hazard.
Recent events (2)
- — I (S) $1243
- — Z (S) $2486
More inspections at Eastern WEB Handling INC
View Eastern WEB Handling INC's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346054109.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.