NEDERLAND, TX —
OSHA Inspection: A1 WASH & SERVICES LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of A1 WASH & SERVICES LLC in 3077 US-69, NEDERLAND, TX 77627 (NAICS 562998). OSHA activity number 346054224.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- A1 WASH & SERVICES LLC
- Site address
- 3077 US-69
- City
- NEDERLAND
- State
- TX
- ZIP
- 77627
- Mailing
- 3077 US-69, NEDERLAND, TX 77627
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562998
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 E01
- Issued
- Dec 1, 2022
- Abate by
- Dec 20, 2022
- Penalty
- Initial $1,678 · Current $1,678
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator before the employee was fit tested or required to use the respirator in the workplace: a) At the facility, employees using 3M full-face respirators during tank cleaning activities had not received medical evaluations.
Recent events (1)
- — Z (S) $1678
1910.134 F02
- Issued
- Dec 1, 2022
- Abate by
- Dec 20, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: a) At the facility, employees using 3M full-face respirators during tank cleaning activities had not been fit tested.
Recent events (1)
- — Z (S) $0
1910.303 F02
- Issued
- Dec 1, 2022
- Abate by
- Dec 20, 2022
- Penalty
- Initial $1,678 · Current $1,678
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) Located outside of the tank cleaning bay, four heavy-duty electrical safety switches were not labeled.
Recent events (1)
- — Z (S) $1678
1910.303 G01
- Issued
- Dec 1, 2022
- Abate by
- Dec 20, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a) Located outside of the tank cleaning bay, where there was not sufficient space around two electrical safety switches, exposing employees to electrical hazards.
Recent events (1)
- — Z (S) $0
1910.1200 G08
- Issued
- Dec 1, 2022
- Abate by
- Dec 20, 2022
- Penalty
- Initial $1,678 · Current $1,678
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s): a) At the facility, where a safety data sheet (SDS) for Sledgehammer, a corrosive, was not readily accessible to employees.
Recent events (1)
- — Z (S) $1678
1910.1200 H01
- Issued
- Dec 1, 2022
- Abate by
- Dec 20, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) At the facility, employees were not provided with hazard communication training and information. Employees use hazardous chemicals such as, but not limited to, Sledgehammer, a corrosive.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 562998)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346054224.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.