WILLIAMSTOWN, NJ —
OSHA Inspection: GREAT RAILING INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of GREAT RAILING INC. in 1086 NORTH BLACK HORSE PIKE, WILLIAMSTOWN, NJ 08094 (NAICS 423310). OSHA activity number 346059686.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREAT RAILING INC.
- Site address
- 1086 NORTH BLACK HORSE PIKE
- City
- WILLIAMSTOWN
- State
- NJ
- ZIP
- 08094
- Mailing
- 1086 NORTH BLACK HORSE PIKE, WILLIAMSTOWN, NJ 08094
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423310
- Employees
- 42
- Ownership type
- A
Citations
8 citations on file for this inspection.
1910.36 D01
- Issued
- Nov 28, 2022
- Abate by
- Dec 22, 2022
- Penalty
- Initial $10,151 · Current $6,100 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) First Storage Building/Front Shop: On or about 7/6/2022, an exit door located near the front of the building and restrooms was bolted shut and locked, impeding employee egress. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $6100
- — Z (S) $10151
1910.37 A03
- Issued
- Nov 28, 2022
- Abate by
- Dec 22, 2022
- Penalty
- Initial $10,151 · Current $6,100 Reduced
General-duty citation text
29 CFR 1910.37(a)(3):Exit route(s) were not kept free and unobstructed: a) Vinyl Cutting Building/Back Shop: On or about 7/6/2022, a designated exit on the Northeast end of the building was obstructed with boxes, metal racks of vinyl, wood pieces, and metal pieces on both the inside and outside of the building, impeding employee egress. b) Vinyl Cutting Building/Back Shop: On or about 7/6/2022, a designated exit on the Southeast end of the building was obstructed from with a metal rack of cut vinyl pieces, impeding employee egress. c) Middle Section/Front Shop: On or about 7/6/2022, a designated exit leading into the offices and Back Shop on the North side of the building was obstructed with boxes, impeding employee egress. d) Middle Section/Front Shop: On or about 7/6/2022, the aisleways in the building were obstructed with boxes and product, impeding employee egress. e) Front Section/Front Shop: On or about 7/6/2022, the egress path from the restroom, next to Rack 6, was obstructed to less than 18 inches with boxes and product, impeding employee egress. f) Front Section/Front Shop: On or about 7/6/2022, Aisle 8, adjacent to the restroom area, on the South side of the building was obstructed with boxes and product, impeding employee egress. g) Front Section/Front Shop: On or about 7/6/2022, Aisle 1, adjacent to the rollup door on the east side of the building was obstructed with boxes and product, impeding employee egress. h) Front Section/Front Shop: On or about 7/6/2022, the door leading outside was bolted shut and blocked with boxes and product, preventing employee egress. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $6100
- — Z (S) $10151
1910.37 B02
- Issued
- Nov 28, 2022
- Abate by
- Dec 22, 2022
- Penalty
- Initial $8,702 · Current $5,230 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) Offices/Front Shop: On or about 7/6/2022, a designated exit sign was not affixed to exit doors in the office between the Front Shop and Back Shop, impeding employee egress. b) Front Section/Front Shop: On or about 7/6/2022, a designated exit sign was not affixed to the exit door in the Rack 6 area, impeding employee egress. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $5230
- — Z (S) $8702
1910.37 B04
- Issued
- Nov 28, 2022
- Abate by
- Dec 22, 2022
- Penalty
- Initial $8,702 · Current $5,230 Reduced
General-duty citation text
29 CFR 1910.37(b)(4): Signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge when the direction of travel to the exit or exit discharge was not immediately apparent: a) Front Section/Front Shop: On or about 7/6/2022, exit access signs showing direction of travel were not posted to show direction to the exit door, impeding employee egress. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $5230
- — Z (S) $8702
1910.37 B06
- Issued
- Nov 28, 2022
- Abate by
- Dec 22, 2022
- Penalty
- Initial $8,702 · Current $5,230 Reduced
General-duty citation text
29 CFR 1910.37(b)(6):Each exit sign was not illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source and be distinctive in color: a) Middle Section/Front Shop: On or about 7/6/2022, a designated exit sign leading into the offices and Back Shop on the North side of the building was not illuminated, impeding employee egress. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $5230
- — Z (S) $8702
1910.133 A01
- Issued
- Nov 28, 2022
- Penalty
- Initial $4,351 · Current $2,610 Reduced
General-duty citation text
29 CFR 1910.133(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Vinyl Cutting Building/Back Shop: On or about 7/6/2022, employees performing cutting tasks using the Control Technology Cutting Machine Model:VRC2000, SN:VRC2000-87, Control Technology Cutting Machine Model VRC6000 SN:VRC6000-08, Control Technology Cutting Machine Model VRC6000 SN:VRC6000-07 were not wearing safety glasses and were exposed to flying vinyl particles.
Recent events (2)
- — I (S) $2610
- — Z (S) $4351
1910.176 B
- Issued
- Nov 28, 2022
- Abate by
- Dec 22, 2022
- Penalty
- Initial $10,151 · Current $6,100 Reduced
General-duty citation text
29 CFR 1910.176(b):Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse: a) Yard: On or about 7/6/2022, boxes and vinyl stored in the yard were not stacked in such a way as to prevent sliding or collapse. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
- — I (S) $6100
- — Z (S) $10151
1910.212 A03 II
- Issued
- Nov 28, 2022
- Penalty
- Initial $10,151 · Current $6,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Vinyl Cutting Building/Back Shop: On or about 7/6/2022, a guard was not affixed to the Dewalt Miter Saw Model DWS779, Serial 11168 to cover the blade.
Recent events (2)
- — I (S) $6100
- — Z (S) $10151
More inspections in this industry (NAICS 423310)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346059686.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.