Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONTINENTAL MASONRY SYSTEMS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CONTINENTAL MASONRY SYSTEMS, INC. in 110 E OGDEN AVE, HINSDALE, IL 60521 (NAICS 238140). OSHA activity number 346088941.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Continental Masonry Systems, INC. — free Get an email when a new federal OSHA severe-injury report for Continental Masonry Systems, INC. is published. One employer, no account, unsubscribe in one click.
Site address
110 E OGDEN AVE
City
HINSDALE
State
IL
ZIP
60521
Mailing
550 FRONTAGE ROAD SUITE 2835, NORTHFIELD, IL 60093
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238140
Employees
7
Ownership type
A

6 citations on file for this inspection.

1903.19 D01

Other-than-serious 2 instances 4 exposed
Issued
Nov 1, 2022
Abate by
Dec 22, 2022
Penalty
Initial $349 · Current $349
29 CFR  1903.19(d)(1):The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  Continental Wall Systems Group Inc.. failed to submit documents to OSHA within 10 calendar days after the abatement date verifying  that each of the following cited violations had been corrected:  Citation Number                      Item  Number                 Abatement Date 01                                                    01                                       09/26/2022 01                                                    02                                       09/12/2022 01                                                    03                                       09/12/2022 01                                                    04                                       09/12/2022 01                                                    05                                       09/12/2022   Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (O) $349

1910.1200 E01

Serious Gravity 5 1 instance 5 exposed
Issued
Aug 26, 2022
Abate by
Sep 26, 2022
Penalty
Initial $2,486 · Current $2,486
29 CFR  1910.1200(e)(1):The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  On or about July 20, 2022, the employer did not implement or maintain a hazard communications program containing the criteria contained in paragraphs (f), (g) and (h), exposing the employee to the respiratory hazards associated with Silica.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $2486

1926.451 B01

Serious Gravity 10 1 instance 4 exposed
Issued
Aug 26, 2022
Abate by
Sep 12, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR  1926.451(b)(1):Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii):  On or about July 20, 2022, employees working from a metal framed scaffold were exposed to falls of more than 16 feet as the walking/ working section was not fully planked between the uprights.    Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $4351

1926.451 C02

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 26, 2022
Abate by
Sep 12, 2022
Penalty
Initial $3,108 · Current $3,108
29 CFR  1926.451(c)(2):Supported scaffold poles, legs, posts, frames,  or uprights did not bear on base plates and mud sills or other adequate firm foundation:  On or about July 20, 2022, employees working from a metal framed scaffold were exposed to a scaffold collapse, and fall of over 16 feet as the uprights did not bear on baseplates and mud sills.    Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $3108

1926.451 E01

Serious Gravity 5 1 instance 4 exposed
Issued
Aug 26, 2022
Abate by
Sep 12, 2022
Penalty
Initial $2,486 · Current $2,486
29 CFR  1926.451(e)(1):When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  On or about July 20, 2022, employees working from a metal framed scaffold were not provided safe access, exposing employees to a fall greater than 16 feet.    Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $2486

1926.451 G01

Serious Gravity 10 1 instance 5 exposed
Issued
Aug 26, 2022
Abate by
Sep 12, 2022
Penalty
Initial $4,351 · Current $4,351
29 CFR  1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:   On or about July 20, 2022, employees were not protected from falls while working from a metal framed scaffold, exposing employees to a fall of over 16 feet.  Abatement documentation is required of this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (1)
  • — Z (S) $4351

View Continental Masonry Systems, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346088941.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.