GRINDSTONE, PA —
OSHA Inspection: SHUMAR'S WELDING AND MACHINE SERVICE, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SHUMAR'S WELDING AND MACHINE SERVICE, INC. in 6697 NATIONAL PIKE, GRINDSTONE, PA 15442 (NAICS 331210). OSHA activity number 346090954.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHUMAR'S WELDING AND MACHINE SERVICE, INC.
- Site address
- 6697 NATIONAL PIKE
- City
- GRINDSTONE
- State
- PA
- ZIP
- 15442
- Mailing
- 414 STONE CHURCH ROAD, BRIER HILL, PA 15415
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331210
- Employees
- 35
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 I
- Issued
- Aug 23, 2022
- Penalty
- Initial $5,801 · Current $5,801
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Facility, 6697 National Pike, Brier Hill, PA: On or about July 20, 2022, the owner told the csho that they have 7 employees that operate forklifts daily and they're certifications are out of date.
Recent events (1)
- — Z (S) $5801
1910.178 P01
- Issued
- Aug 23, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1):Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): a) Facility, 6697 National Pike, Brier Hill, PA: On or about July 20, 2022, forklifts were being operated on a daily basis with the horns not working and one was also missing a seat belt.
Recent events (1)
- — Z (S) $0
1910.212 A01
- Issued
- Aug 23, 2022
- Penalty
- Initial $8,702 · Current $8,702
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Facility, 6697 National Pike, Brier Hill, PA: On or about July 20, 2022, employees were exposed to the unguarded blade on the HYD-MECH S-20A bandsaw that is used on a daily basis to cut round bar, flat bar and tubing.
Recent events (1)
- — Z (S) $8702
1910.215 A01
- Issued
- Aug 23, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(1):Abrasive wheel(s) used on grinding machinery were not used with safety guard(s): a) Facility, 6697 National Pike, Brier Hill, PA: On or about July 20, 2022, employees were using grinders to grind on metal that did not have the guards attached to them.
Recent events (1)
- — Z (S) $0
1910.303 G01
- Issued
- Aug 23, 2022
- Penalty
- Initial $5,801 · Current $5,801
General-duty citation text
29 CFR 1910.303(g)(1):Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: a) Facility, 6697 National Pike, Brier Hill, PA: On or about July 20, 2022, pallets of material and other items were stored directly below and around the electric panel in the paint area.
Recent events (1)
- — Z (S) $5801
1904.41 A02
- Issued
- Aug 23, 2022
- Penalty
- Initial $1,450 · Current $1,450
General-duty citation text
29 CFR 1904.41(a)(2): 29 CFR 1904.41(a)(2) Annual electronic submission of OSHA Form 300A Summary of Work-Related Injuries and Illnesses by establishments with 20 or more employees but fewer than 250 employees in designated industries. If your establishment had 20 or more employees but fewer than 250 employees at any time during the previous calendar year, and your establishment is classified in an industry listed in appendix A to subpart E of this part, then you must electronically submit information from OSHA Form 300A Summary of Work-Related Injuries and Illnesses to OSHA or OSHA's designee. You must submit the information once a year, no later than the date listed in paragraph (c) of this section of the year after the calendar year covered by the form. Located at Shumar's Welding and Machine Service, Inc., 414 Stone Church Road, Grindstone, PA: The employer failed during calendar year 2021, to electronically submit information from their OSHA Form 300A or equivalent by 3/02/2022.
Recent events (1)
- — Z (O) $1450
More inspections at Shumar'S Welding and Machine Service, INC.
View Shumar'S Welding and Machine Service, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 331210)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346090954.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.