CAPE MAY, NJ —
OSHA Inspection: AGNES CARPENTRY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AGNES CARPENTRY, INC. in 923 COLUMBIA AVE, CAPE MAY, NJ 08204 (NAICS 238160). OSHA activity number 346092133.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGNES CARPENTRY, INC.
- Site address
- 923 COLUMBIA AVE
- City
- CAPE MAY
- State
- NJ
- ZIP
- 08204
- Mailing
- 316 BEM ST, RIVERSIDE, NJ 08075
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 5
- Ownership type
- A
Citations
2 citations on file for this inspection.
1926.1053 A03 I
- Issued
- Sep 26, 2022
- Penalty
- Initial $2,486 · Current $2,486
General-duty citation text
29 CFR 1926.1053(a)(3)(i): Rungs, cleats, and steps of portable ladders were not spaced not less than 10 inches apart, nor more than 14 inches apart, as measured between center lines of the rungs, cleats, and steps: a) 932 Columbia Ave, Cape May, NJ - The employer did not ensure that the job-made ladder rungs were at least 10 inches and no more than 14 inches apart, the rungs on the job-made ladder measured approximately 22 inches apart from center line of the rungs, thus exposing employees to a fall hazard. This condition was observed on or about July 19, 2022.
Recent events (1)
- — Z (S) $2486
1926.501 B14
- Issued
- Sep 26, 2022
- Penalty
- Initial $12,431 · Current $12,431
General-duty citation text
29 CFR 1926.501(b)(14):The employer did not ensure that each employee working on, at, above, or near wall openings where the outside bottom edge of the wall opening was 6 feet (1.8 m) or more above lower levels and the inside bottom edge of the wall opening was less than 39 inches above the walking/working surface, were not protected from falling by the use of a guardrail system, a safety net system, or a personal fall arrest system: a) 932 Columbia Ave, Cape May, NJ - Employees exposed to fall hazards in that the employer failed to ensure that a guardrail was positioned at the wall openings for windows. This condition was observed on or about July 19, 2022. The Agnes Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard CFR 1926.501(b)(1), which was contained in OSHA inspection number 1321211, citation number 01, item number 002 and was affirmed as a final order on August 30, 2018, with respect to a workplace located at 1300 Betty Lane, Ewing, NJ 08628. The Agnes Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard CFR 1926.501(b)(1), which was contained in OSHA inspection number 1298218, citation number 01, item number 001 and was affirmed as a final order on June 15, 2018, with respect to a workplace located at 1400 Betty Lane, Ewing, NJ 08628. The Agnes Carpentry, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard CFR 1926.501(b)(13) , which was contained in OSHA inspection number 1297753, citation number 01, item number 001 and was affirmed as a final order on June 15, 2018, with respect to a workplace located at 6504 Pleasure Ave, Sea Isle City, NJ 08243.
Recent events (1)
- — Z (R) $12431
More inspections at Agnes Carpentry, INC.
View Agnes Carpentry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346092133.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.