WATERLOO, WI —
OSHA Inspection: SUSSEK MACHINE COMPANY, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SUSSEK MACHINE COMPANY, LLC in 805 PIERCE STREET, WATERLOO, WI 53594 (NAICS 332710). OSHA activity number 346104540.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUSSEK MACHINE COMPANY, LLC
- Site address
- 805 PIERCE STREET
- City
- WATERLOO
- State
- WI
- ZIP
- 53594
- Mailing
- 805 PIERCE STREET, WATERLOO, WI 53594
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 150
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 A03
- Issued
- Dec 16, 2022
- Abate by
- Jan 20, 2023
- Penalty
- Initial $8,806 · Current $6,605 Reduced
General-duty citation text
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: On or about July 26, 2022, the exit route(s) to Door 11 and Door 12 in the Warehouse Area were not kept free and unobstructed.
Recent events (2)
- — I (S) $6605
- — Z (S) $8806
1910.147 C04 I
- Issued
- Dec 16, 2022
- Abate by
- Apr 11, 2023
- Penalty
- Initial $7,044 · Current $5,283 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i):Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about July 26, 2022, the employer did not ensure the procedure for controlling hazardous energy on CNC machines in the Triangle Area were developed prior to employee completing tooling changes.
Recent events (2)
- — I (S) $5283
- — Z (S) $7044
1910.147 C05 I
- Issued
- Dec 16, 2022
- Abate by
- Jan 20, 2023
- Penalty
- Initial $7,044 · Current $7,044
General-duty citation text
29 CFR 1910.147(c)(5)(i):Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: On or about July 26, 2022, the employer did not ensure that hardware for isolating, securing or blocking of electrical, pneumatic, and/or hydraulic energy sources was provided by the employer prior to performing tooling changes on CNC machines in the Triangle Area..
Recent events (2)
- — I (S) $7044
- — Z (S) $7044
1910.147 C07 I
- Issued
- Dec 16, 2022
- Abate by
- Jan 20, 2023
- Penalty
- Initial $7,044 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: On or about July 26, 2022, the employer did not ensure that employees performing tooling changes on CNC machines in the Triangle Area were provided training on the safe application, usage, and removal of energy controls.
Recent events (2)
- — I (S) $0
- — Z (S) $7044
1910.212 A01
- Issued
- Dec 16, 2022
- Abate by
- Jan 3, 2023
- Penalty
- Initial $7,044 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about July 26, 2022, the Okuma LR 25 CNC Machine (S/N 0508-0641) was were not equipped with one or more methods of machine guarding to prevent the operator from accessing rotating parts and/or the point of operation inside the machines during operation. (b) On or about July 26, 2022, the Okuma LU 15 CNC Machine (S/N 0606-0022 was were not equipped with one or more methods of machine guarding to prevent the operator from accessing rotating parts and/or the point of operation inside the machines during operation.
Recent events (2)
- — I (S) $0
- — Z (S) $7044
More inspections at Sussek Machine Company, LLC
View Sussek Machine Company, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346104540.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.