CARLTON, KS —
OSHA Inspection: AGRI TRAILS COOP, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AGRI TRAILS COOP, INC. in 320 MAIN AVENUE, CARLTON, KS 67448 (NAICS 424510). OSHA activity number 346112766.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGRI TRAILS COOP, INC.
- Site address
- 320 MAIN AVENUE
- City
- CARLTON
- State
- KS
- ZIP
- 67448
- Mailing
- 320 MAIN AVENUE, CARLTON, KS 67448
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424510
- Employees
- 6
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 P01
- Issued
- Oct 25, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $5,594 · Current $3,356 Reduced
General-duty citation text
29 CFR 1910.178(p)(1):Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): In the Feed Mill, employee(s) engaged in material handling activities were exposed to struck by hazards in that a Yale forklift Model # GLP050PFHU0AE086; Serial No: B177BH2537 was found in disrepair as the horn for the forklift had been removed and was not present and wiring for the forklift levers were exposed.
Recent events (2)
- — I (S) $3356.4
- — Z (S) $5594
1910.219 C04 I
- Issued
- Oct 25, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $7,458 · Current $4,475 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i):Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: In the Boot Pit of the Main Elevator, employee(s)engaged in grain production and cleaning activities were exposed to tripping, caught in, and struck by hazards in that an unguarded projecting shaft from the main motor for the grain elevator extended 2 inches in length when the diameter was only 1 inch.
Recent events (2)
- — I (S) $4474.8
- — Z (S) $7458
1910.219 D01
- Issued
- Oct 25, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $13,052 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1):Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): In the Feed Mill, employee(s) engaged in grain production and feed activities were exposed to amputation hazards in that a top mounted pulley for the transmission/motor of a Union Special Des Moines Sewing Machine Co sewing/bagging machine; Model: 80800FN; Serial No: UM1925047; located less than seven feet from the floor or work platform was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $13052
1910.303 F02
- Issued
- Oct 25, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $5,594 · Current $3,356 Reduced
General-duty citation text
29 CFR 1910.303(f)(2):Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: In the Main Elevator on the ground level, employee(s) engaged in grain production and maintenance activities were exposed to electrical shock and fire hazards in that the circuit breaker panel labels were not marked with current labeling.
Recent events (2)
- — I (S) $3356.4
- — Z (S) $5594
1910.178 A06
- Issued
- Oct 25, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $373 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(a)(6):The employer did not ensure that all nameplates or markings were maintained in a legible condition: In the Feed Mill, employee(s) engaged in material handling activities were exposed to struck by hazards in that the labeling and markings on the forklift controls were not present. The forklift was: Make: Yale; Model: GLP050PFHU0AE086; Serial No: B177BH2537. Agri Trails Coop, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.178(a)(6), which was contained in OSHA inspection number 1520191, citation number 1, item number 1, and was affirmed as a final order on 7-1-21, with respect to a workplace located at 1 Northeast Railway Woodbine, KS 67492. Agri Trails Coop, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.178(a)(6), which was contained in OSHA inspection number 1508036, citation number 1, item number 5, and was affirmed as a final order on 2-18-2021, with respect to a workplace located at 500 North 7th St Herington, KS 67449.
Recent events (2)
- — I (R) $0
- — Z (R) $373
More inspections at Agri Trails Coop, INC.
View Agri Trails Coop, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 424510)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346112766.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.