Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: H.C. MARTIN BODY COMPANY

Unprogrammed Related inspection · Health discipline

On , OSHA opened an unprogrammed Related health inspection of H.C. MARTIN BODY COMPANY in 405 KEYSTONE BLVD., POTTSTOWN, PA 19464 (NAICS 811121). OSHA activity number 346126972.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch H.C. Martin Body Company — free Get an email when a new federal OSHA severe-injury report for H.C. Martin Body Company is published. One employer, no account, unsubscribe in one click.
Site address
405 KEYSTONE BLVD.
City
POTTSTOWN
State
PA
ZIP
19464
Mailing
449 OLD READING PIKE, POTTSTOWN, PA 19464
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
811121
Employees
5
Ownership type
A

5 citations on file for this inspection.

1910.134 C01

Serious Gravity 1 1 instance 3 exposed
Issued
Jan 23, 2023
Abate by
Feb 16, 2023
Penalty
Initial $2,009 · Current $2,009
29 CFR  1910.134(c)(1):A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  a) Spray area- On or about August 3, 2022, employees used hazardous chemicals, including, but not limited to SEM Self Etching Primer #39683, Wanda 8100 2k Clear, & Lesonal Basecoat SB 92P and the employer provided and required employees to wear respirators (3M L7503 & 3M Versaflo M-100) and did not have a written respiratory program in accordance with this section.  Abatement certification required within 15 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $2009

1910.134 E01

Serious Gravity 5 1 instance 5 exposed
Issued
Jan 23, 2023
Abate by
Feb 16, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(e)(1):The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) Spray area - On or about August 3, 2022, the employer provided and required employees to wear half-face (3M L7503) and full-face (3M Versaflo M-100) elastomeric air purifying respirators and the employer did not provide employees a medical evaluation in accordance with this section.   Abatement certification required within 15 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $0

1910.134 F02

Serious Gravity 5 1 instance 3 exposed
Issued
Jan 23, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator:   a) Spray area - On or about August 3, 2022, the employer provided and required employees to wear 3M half-mask respirators (3M L7503) and the employer did not provide fit testing in accordance with this section.  Abatement certification required within 15 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $0

1910.134 H01 I

Serious Gravity 5 2 instances 5 exposed
Issued
Jan 23, 2023
Abate by
Feb 16, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(h)(1)(i):Respirators issued for the exclusive use of an employee were not cleaned and disinfected as often as necessary to be maintained in a sanitary condition:  a) Spray area- On or about August 3, 2022, half-face (3M L7503)respirators had visible debris and residue coating the surface and were not maintained in a sanitary condition and  in accordance with this section.  Abatement certification required within 15 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $0

1910.134 H02 I

Serious Gravity 5 2 instances 5 exposed
Issued
Jan 23, 2023
Abate by
Feb 16, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or  were not packed or stored to prevent deformation of the facepiece and exhalation valve:  a) Spray area - On or about August 3, 2022, it was observed that the respirators (3M L7503 & 3M Versaflo M-100) were not properly stored to prevent damage or defects in accordance with this section.  Abatement certification required within 15 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states that employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346126972.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.