COEUR D ALENE, ID ·
OSHA Inspection: BROOKS BUILT, LLC
Programmed Other inspection · Safety discipline
At a glance
On , OSHA opened a programmed Other safety inspection of BROOKS BUILT, LLC in 8899 W. RANGE DR., COEUR D ALENE, ID 83814 (NAICS 238130). OSHA activity number 346131824.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BROOKS BUILT, LLC
- Site address
- 8899 W. RANGE DR.
- City
- COEUR D ALENE
- State
- ID
- ZIP
- 83814
- Mailing
- 3207 N. 9TH ST., COEUR D ALENE, ID 83815
What kind of inspection was it?
- Inspection type
- Programmed Other (K)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.501 B13
- Issued
- Oct 17, 2022
- Abate by
- Oct 27, 2022
- Penalty
- Initial $3,729 · Current $3,729
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) 8899 W. Range Dr. - On or about August 8, 2022, employees engaged in framing of a new residential residence working at heights greater than nine (9) feet from ground level without the use of fall protection, exposing employees to fall hazards.
Recent events (1)
- · Z (S) $3729
1926.503 A01
- Issued
- Oct 17, 2022
- Abate by
- Oct 27, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) 8899 W. Range Dr. - On or about August 8, 2022, employees engaged in framing of a new residential residence working at heights greater than nine (9) feet from ground level without fall hazard training.
Recent events (1)
- · Z (S) $0
1926.1053 B01
- Issued
- Oct 17, 2022
- Abate by
- Oct 27, 2022
- Penalty
- Initial $3,729 · Current $3,729
General-duty citation text
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder: a) 8899 W. Range Dr. - On or about August 8, 2022, employees utilized an eight (8) feet fiberglass step ladder manufactured by Werner to access the top plate of frame members at a height of 9 feet. The ladder was not secured at its top to ensure it did not deflect and no grasping devices were available to assist employees when mounting the surface of the top plate, exposing employees to fall hazards greater than nine (9) feet to the ground level below.
Recent events (1)
- · Z (S) $3729
1926.1053 B04
- Issued
- Oct 17, 2022
- Abate by
- Oct 27, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(4):Ladder(s) were used for purposes other than the purpose for which they were designed: (a) A Werner 8 foot self-supporting A-frame ladder was used in the closed position, leaning against the building, to access the upper level during framing activities. A-frame ladders are designed to be used in the open position with spreaders locked. NOTE: Certification of corrective action (abatement) is required for this item.
Recent events (1)
- · Z (S) $0
1926.1060 A
- Issued
- Oct 17, 2022
- Abate by
- Oct 27, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards. a) 8899 W. Range Dr. - On or about August 8, 2022, employees utilized an eight (8) feet fiberglass step ladder manufactured by Werner to access the top plate of frame members without training in proper use, exposing employees to fall hazards.
Recent events (1)
- · Z (S) $0
More inspections in this industry (NAICS 238130)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 346131824.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.