ROCHESTER, NH —
OSHA Inspection: JAEGER USA, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of JAEGER USA, INC. in 196 PICKERING ROAD, ROCHESTER, NH 03867 (NAICS 313320). OSHA activity number 346139926.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JAEGER USA, INC.
- Site address
- 196 PICKERING ROAD
- City
- ROCHESTER
- State
- NH
- ZIP
- 03867
- Mailing
- 198 PICKERING ROAD, ROCHESTER, NH 03867
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 313320
- Employees
- 33
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.22 A03
- Issued
- Nov 8, 2022
- Abate by
- Nov 21, 2022
- Penalty
- Initial $4,351 · Current $1,631 Reduced
General-duty citation text
29 CFR 1910.22(a)(3): The employer did not ensure that walking-working surfaces are maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice. Line 1B - On or about August 9, 2022, the employer did not ensure that walking-working surfaces were free of protruding objects where the operators platform had an approximate 2 inch lip on the edge creating a trip and fall hazard to employees operating the machine.
Recent events (2)
- — I (S) $1631
- — Z (S) $4351
1910.147 C04 II B
- Issued
- Nov 8, 2022
- Abate by
- Mar 1, 2023
- Penalty
- Initial $7,252 · Current $2,730 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. Line 1B - On or about August 9, 2022, the employer had not developed energy control procedures that clearly and specifically outlined the steps for controlling hazardous energy for line 1B.
Recent events (2)
- — I (S) $2730
- — Z (S) $7252
1910.147 C06 I
- Issued
- Nov 8, 2022
- Abate by
- Mar 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. Production Floor - On or about August 9, 2022, the employer did not conduct periodic inspections of the energy control procedures at least annually where periodic inspections had not been implemented in their program.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Nov 8, 2022
- Abate by
- Dec 28, 2022
- Penalty
- Initial $7,252 · Current $2,730 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section: Line 1B - On or about August 9, 2022, the pulley or the Merrow sewing machine did not have a guard installed to protect the operator.
Recent events (2)
- — I (S) $2730
- — Z (S) $7252
1910.219 E03 I
- Issued
- Nov 8, 2022
- Abate by
- Dec 14, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o). Line 1B - On or about August 9, 2022, the inclined drive belt for the Merrow sewing machine did not have a guard installed to protect the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C04 I
- Issued
- Nov 8, 2022
- Penalty
- Initial $7,252 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft. Line 1B - On or about August 9, 2022, employees operating line 1B were not protected from the unguarded projecting shaft end and roller brake set up on the lower powered roller.
Recent events (2)
- — I (S) $0
- — Z (S) $7252
1904.39 A02
- Issued
- Nov 8, 2022
- Penalty
- Initial $7,252 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye. On or about August 5, 2022, the employer did not report an amputation incident that occurred on August 2, 2022, within 24-hours.
Recent events (2)
- — I (O) $0
- — Z (O) $7252
More inspections at Jaeger USA, INC.
View Jaeger USA, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 313320)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346139926.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.